Tracking Error Reduction in CNC Machining
نویسندگان
چکیده
In this paper, a method of reducing the tracking error in CNC machining is proposed. The structured neural network is used to approximate the discontinuous friction in CNC machining, which has jump points and uncertainties. With the estimated nonlinear friction function, the reshaped trajectory can be computed from the desired one by solving a second order ODE such that when the reshaped trajectory is fed into the CNC controller, the output is the desired trajectory and the tracking error is eliminated in certain sense. The proposed reshape method is also shown to be robust with respect to certain parameters of the dynamic system.
منابع مشابه
Tracking error reduction in CNC machining by reshaping the kinematic trajectory
In this paper, a method of reducing the tracking error in CNC machining is proposed. The structured neural network is used to approximate the discontinuous friction in CNC machining, which has jump points and uncertainties. With the estimated nonlinear friction function, the reshaped trajectory can be computed from the desired one by solving a second order ODE such that when the reshaped trajec...
متن کاملEfficient time-optimal feedrate planning under dynamic constraints for a high-order CNC servo system
In this paper, the time optimal feedrate planning problem under confined feedrate, axis velocity, axis acceleration, axis jerk, and axis tracking error for a high order CNC servo system is studied. The problem is useful in that the full ability of the CNC machine is used to enhance the machining productivity while keeping the machining precision under a given level. However, the problem is comp...
متن کاملAdaptive Fuzzy Sliding Controller with Dynamic Compensation for Multi-Axis Machining
The precision of multi-axis machining is deeply influenced by the tracking error of multi-axis control system. Since the multi-axis machine tools have nonlinear and time-varying behaviors, it is difficult to establish an accurate dynamic model for multi-axis control system design. In this paper, a novel adaptive fuzzy sliding model controller with dynamic compensation is proposed to reduce trac...
متن کاملFeed optimization for five-axis CNC machine tools with drive constraints
Real time control of five-axis machine tools requires smooth generation of feed, acceleration and jerk in CNC systems without violating the physical limits of the drives. This paper presents a feed scheduling algorithm for CNC systems to minimize the machining time for five-axis contour machining of sculptured surfaces. The variation of the feed along the five-axis tool-path is expressed in a c...
متن کاملCubic Spline Trajectory Generation with Axis Jerk and Tracking Error Constraints
This paper presents a cubic spline trajectory generation algorithm that produces continuous position, velocity, and acceleration profiles for 3-axis CNC machines with confined axis jerk and tracking error. A series of reference knots are connected using cubic spline functions in time t for constructing axis trajectories. They are generated in such a way that continuity up to the second derivati...
متن کامل