Design of HPC System for Analysis the Gel-Polymer Flooding of Oil Fields
نویسندگان
چکیده
This article discusses development of the "Polymer flooding" module for distributed information system of oil fields development analysis. This module is designed to simulate displacement of oil using polymer injection method for 1532 Timur Imankulov et al. enhanced oil recovery and based on modern mathematical model that considers influence of salt and polymer concentrations on viscosity of injected reagent. Also, permeability changes of aqueous phase depending on adsorption of the polymer and residual resistance factor are considered. Results of numerical studies of two-dimensional and three-dimensional cylindrical domain are presented. Main results of numerical experiments compared with laboratory tests and calculations of reservoir simulator Eclipse (Blackoil). Distribution of main technological parameters is obtained and efficiency of oil displacement using polymer (polyacrylamide, gellan) injection is shown. The module of polymer injection of distributed information system for oil field development analysis (ISAR-2) with operational monitoring in real time is developed.
منابع مشابه
Simulation Study of Salinity Effect on Polymer Flooding in Core Scale
In this study, simulation of low salinity polymer flooding in the core scale is investigated using Eclipse-100 simulator. For this purpose, two sets of data are used. The first set of data were adopted from the results of experimental studies conducted at the University of Bergen, performed using Berea sandstone and intermediate oil. The second data set, related to sand pack and heavy oil syste...
متن کاملPolyacrylamide Gel Polymer as Water Shut-off System: Preparation and Investigation of Physical and Chemical Properties in One of the Iranian Oil Reservoirs Conditions
In this paper, polyacrylamide/chromium acetate gel polymer system was prepared as water shut-off system to control water production in one of the Iranian oil reservoirs condition. Effect of various parameters such as temperature (90 °C) and water formation from view point of salinity and divalent cations, was evaluated on the gelation kinetic and gel strength using bottle testing method. Th...
متن کاملAn Influence of Polymer-Alkaline and Nanoparticles as Chemical Additives on the Immiscible Displacement and Phase Relative Permeability
In this study, a chemical additive made by a combination of polymer, alkaline, and silica nanoparticles is used to control the oil recovery and relative permeability curves. Various parametersincluding the type and concentration of polymer, alkaline, and nanosilica particles have been studied.To evaluate the efficiency of these additives, we performed unsteady state displaceme...
متن کاملSmall field size dose-profile measurements using MAGIC- f polymer gel dosimeter and EBT3 film dosimeter
Introduction: In radiotherapy, treatment planning methods are evaluating and transforming every day, so precision in calculation and determination of dose delivery process is performing more important role in radiotherapy than past. In modern radiotherapy treatments, deramatically increase of small fields utilization, causes the polymeric gels has known as the most reliable dos...
متن کاملFull Implicit Numerical Simulator for Polymer Flooding and Profile Control
In this paper, taking account of the major physical and chemical mechanisms, such as: for polymer, shearing propertypermeability reduction, adsorption, inaccessible porous volumes, for gel, gelation speed, water viscosity changing with gel, permeability reduction, adsorption and retention in reservoir rocks, a three-dimensional, three-phase (oleic, vapor, aqueous) and six-component mathematical...
متن کامل