A New Low Power Cmos Full Adder
نویسنده
چکیده
Low power design of VLSI circuits has been identified as a critical technological need in recent years due to the high demand for portable consumer electronics products. In this regard many innovative designs for basic logic functions using pass transistors and transmission gates appeared in the literature recently. But they were all designed mostly by intuition and cleverness of the designer. Hence in this paper a formal design procedure for the design of a minimal transistor CMOS XOR-XNOR cell is presented, that is fully compensated for threshold voltage drop in MOS transistors. This new cell can reliably operate when the power supply voltage is scaled down, as long as due consideration is given to the sizing of the MOS transistors during the initial design step. A formal design approach for a full adder cell using the new XOR-XNOR cell is also presented.
منابع مشابه
Low-Power Adder Design for Nano-Scale CMOS
A fast low-power 1-bit full adder circuit suitable for nano-scale CMOS implementation is presented. Out of the three modules in a common full-adder circuit, we have replaced one with a new design, and optimized another one, all with the goal to reduce the static power consumption. The design has been simulated and evaluated using the 65 nm PTM models.
متن کاملA Low Power Full Adder Cell based on Carbon Nanotube FET for Arithmetic Units
In this paper, a full adder cell based on majority function using Carbon-Nanotube Field-Effect Transistor (CNFET) technology is presented. CNFETs possess considerable features that lead to their wide usage in digital circuits design. For the design of the cell input capacitors and inverters are used. These kinds of design method cause a high degree of regularity and simplicity. The proposed des...
متن کاملLow Power Dynamic CMOS Full-Adder Cell
In this paper a new area efficient, high-speed and ultra-low power 1-bit full adder cell is presented. The performance: power, time delay and power delay product (PDP) of the proposed adder cell has been analyzed in comparison with the four existent low-power, high-speed adders. The circuits being studied are optimized for energy efficiency at 0.18-μm CMOS process technology and intensive simul...
متن کاملA New Low Voltage CMOS 1-Bit Full Adder for Low-Power Applications
In this paper, a new low-voltage low-power CMOS 1-bit full adder circuit is proposed. The proposed full adder can provide a full voltage swing at a low supply voltage and offers superior performance in both power and speed than the conventional full adder, the transmission full adder, and the recent low-voltage full adder. Based on the simulation results performed by HSPICE, the new low-voltage...
متن کاملLow-Power and High-Performance 1-Bit CMOS Full-Adder Cell
In this paper a new low power and high performance adder cell using a new design style called “Bridge” is proposed. The bridge design style enjoys a high degree of regularity, higher density than conventional CMOS design style as well as lower power consumption, by using some transistors, named bridge transistors. Simulation results illustrate the superiority of the resulting proposed adder aga...
متن کاملDesigning of Full Adder Circuits for Low Power
Full adders are important components in applications such as digital signal processing (DSP) architecture, and microprocessors. Over the past decade, several adiabatic logic styles have been reported. This paper deals with the design of a 1-bit full adder using adiabatic logic style (DTGAL), which are derived from static CMOS logic, without a large change. This paper also proposes a new design ...
متن کامل