Resistive Impedance Matching Circuit for Piezoelectric Energy Harvesting
نویسندگان
چکیده
A two-stage power conditioning circuit consisting of an AC DC converter followed by a DC DC converter is proposed for a vibration-based energy harvesting system. The power conditioning circuit intends to maximize the amount of power extracted from a piezoelectric energy harvester by matching the source impedance with the circuit by adaptively adjusting the duty cycle. An equivalent electrical circuit representation derived from a distributed-parameter piezoelectric energy harvester model is adapted to enable the impedance matching method proposed here. For a given piezoelectric energy harvester, there is a theoretical maximum power output that is determined by the mechanical damping, base acceleration, and the effective mass of the harvester structure under base excitation. Experimental results are given to validate the effectiveness of the proposed resistive impedance matching circuit around the first resonance frequency of a cantilevered piezoelectric energy harvester.
منابع مشابه
A Self-powered Piezoelectric Energy Harvesting Circuit with Frequency Conversion for Wireless Sensor Network
This paper presents a self-powered piezoelectric energy harvesting circuit using frequency conversion. A vibration energy harvesting principle is introduced. Due to a capacitive characteristic of the piezoelectric vibration transducer, an energy harvesting circuit is proposed for matching the capacitive impedance. The energy harvesting circuit consists of a matching circuit with up-conversion, ...
متن کاملA Vibration-Based MEMS Piezoelectric Energy Harvester and Power Conditioning Circuit
This paper presents a micro-electro-mechanical system (MEMS) piezoelectric power generator array for vibration energy harvesting. A complete design flow of the vibration-based energy harvester using the finite element method (FEM) is proposed. The modal analysis is selected to calculate the resonant frequency of the harvester, and harmonic analysis is performed to investigate the influence of t...
متن کاملAnalyses of Power Output of Piezoelectric Energy Harvesting Devices Directly Connected to a Resistive Load Using a Coupled Piezoelectric-Circuit Finite Element Method
Analyses of Power Output of Piezoelectric Energy Harvesting Devices Directly Connected to a Resistive Load Using a Coupled Piezoelectric-Circuit Finite Element Method Meiling Zhu, Emma Worthington and James Njuguna Department of Materials, Department of Sustainable Systems Cranfield University, Bedfordshire, MK43 0AL UK Abstract A coupled piezoelectric-circuit finite element model (CPC-FEM) is ...
متن کاملSystem-Level Coupled Modeling of Piezoelectric Vibration Energy Harvesting Systems by Joint Finite Element and Circuit Analysis
A practical piezoelectric vibration energy harvesting (PVEH) system is usually composed of two coupled parts: a harvesting structure and an interface circuit. Thus, it is much necessary to build system-level coupled models for analyzing PVEH systems, so that the whole PVEH system can be optimized to obtain a high overall efficiency. In this paper, two classes of coupled models are proposed by j...
متن کاملTopological Optimization of Piezoelectric Energy Harvesting Devices for Improved Electromechanical Efficiency and Frequency Range
The development of energy harvesting devices with piezoelectric transducers has been widely studied in the last decade. Most of previous studies considered a resonant cantilever beam with an attached tip mass and focused on the proper modeling of the cantilever device, design and optimization of electric harvesting circuit and nonlinear amplification of resonant vibration amplitude. However, fe...
متن کامل