An image plate chamber for x-ray diffraction experiments in Debye–Scherrer geometry
نویسندگان
چکیده
A new design for implementation of x-ray diffraction experiments is proposed. The exploitation of the imaging plate technique opens new possibilities to carry out diffraction experiments. The detector chamber in Debye–Scherrer geometry equipped with an image plate takes advantage of this technology such as high resolution, high sensitivity, linearity in intensity, and linearity over the detector area. The proof of this measurement principle is demonstrated by presentation of the x-ray diffraction pattern of corundum ~crystalline!, nickel ~crystalline!, and sodium borate ~amorphous!. © 2000 American Institute of Physics. @S0034-6748~00!03611-X#
منابع مشابه
Influence of Image Processing Conditions of Debye Scherrer Ring Images in X-ray Stress Measurement Using an Imaging Plate
ABSTXACT This paper describes the study of the possibility of x-ray stress measurement in which stresses are obtained by analyzing the whole of one diffraction ring detected with a two-dimensional x-ray detector called an imaging plate (IP). The theory of the stress determination proposed by Taira et al (1978) was shown and advanced to make measurable all plane stress components. The experiment...
متن کاملDevelopment of Measuring System for Stress by Means of Image Plate for Laboratory X-ray Experiment
A single exposure X-ray incidence method for determining stress using the whole part of the Debye-Scherrer ring was studied. An image plate (IP) was used in this study as an area detector. A stress measuring system using an X-ray two-dimensional detector was developed. This was designed in order to be used in the authors’ X-ray laboratory. The background and the purpose of this study is to poin...
متن کاملSynthesis and Characterization of Nickel Zinc Ferrite Nanoparticles
In this research nickel zinc ferrite nanoparticles with composition of Ni1-xZnxFe2O4 (where x=0, 0.3, 0.7, 1) were synthesized by a sol-gel method at 600 °C for 5 hours. The structure of nanoparticles was studied using X-ray diffraction pattern. The lattice parameter of ferrite nanoparticles was calculated and indicates lattice constant of nanoparticl...
متن کاملFabrication and Characterization of Zinc Sulfide Nanoparticles and Nanocomposites Prepared via a Simple Chemical Precipitation Method
In this research zinc sulfide (ZnS) nanoparticles and nanocomposites powders were prepared by chemical precipitation method using zinc acetate and various sulfur sources. The ZnS nanoparticles were characterized by X-ray diffraction, scanning electron microscopy, ultraviolet-visible and fourier transform infra-red. The structure of nanoparticles was studied using X-ray diffraction pattern. The ...
متن کاملStrains in Thermally Growing Alumina Films Measured In-situ Using Synchrotron X-rays
Strains in thermally grown oxides have been measured in-situ, as the oxides develop and evolve. Extensive data have been acquired from oxides grown in air at elevated temperatures on different model alloys that form Al2O3. Using synchrotron x-rays at the Advanced Photon Source (Beamline 12BM, Argonne National Laboratory), Debye-Scherrer diffraction patterns from the oxidizing specimen were reco...
متن کامل