Forced Convection Subcooled Boiling of Binary Mixtures
نویسنده
چکیده
A mode based on an additive mechanism of heat transfer is proposed for forced convection subcooled boiling of binary mixtures. The contributing modes of heat transfer are: (i) the heat transferred as latent heat by the rising bubbles, (ii) the heat transferred as the heat contained in the superheated thermal layer that is removed from the surface in the wake of the rising bubbles and (iii) the single phase forced convection heat transfer from the heating surface not influenced by the bubbles. Experimental data from the literature on binary systems show good agreement with the model, validating the postulated mechanism.
منابع مشابه
An Experimental Investigation on Flow Boiling of Ethylene-Glycol/ Water Mixtures
Mixtures of ethylene glycol and water are used in cooling the engines in automotive applications. Heat is transferred essentially under subcooled flow boiling conditions as the mixture flows over the hot surfaces, which are at temperatures well above the local saturation temperature of the mixture. Very little information is available in the literature on the subcooled flow boiling characterist...
متن کاملConvective Heat Transfer of Binary Mixtures under Flow Boiling Conditions
The present study represents part of an effort in considering the replacement of ethylene-glycol/water mixtures with propyleneglycol/water mixtures for engine cooling in automotive application. Experimental results are presented for the heat transfer coeffic ient under flow boiling conditions for water and mixtures of water with ethylene-glycol and propylene-glycol. The range covered includes t...
متن کاملAn Experimental Investigation on Flow Boiling of Ethylene-glycol/water Mixture
Mixtures of ethylene glycol and water are used in cooling the engines in automotive applications. To avoid the two-phase flow in the engine, the mixture is subcooled in the radiator before entering the engine block. Heat transfer is therefore essentially under subcooled flow boiling conditions. Very little information is available in the literature on the subcooled flow boiling characteristics ...
متن کاملChannel height effects on forced-convection boiling and critical heat flux from a linear array of discrete heat sources
Due to the lack of understanding in the literature of channel height effects on forced-convection boiling and critical heat flux (CHF) in rectangular channels, experiments were performed with FC-72 at 1.36 bar for channel heights of 2, 5, and 10 mm. Boiling heat transfer from a linear array of nine discrete heat sources simulating microelectronic chips was investigated for velocity and liquid s...
متن کاملNumerical Simulation of Dynamics and Heat Transfer Associated With a Single Bubble in Subcooled Boiling and in the Presence of Noncondensables
During phase change at the bubble-liquid interface, under subcooled boiling conditions, noncondensable gases dissolved in the liquid will be injected into the bubble along with vapor. Due to heat transfer into subcooled liquid, vapor will condense in the upper regions of the bubble while noncondensables will continue to accumulate. Subsequently, thermocapillary convection caused by nonuniform s...
متن کامل