Ultimate efficiency of spectral beam combining by volume Bragg gratings.
نویسندگان
چکیده
Spectral beam combining (SBC) by volume Bragg gratings (VBGs) recorded in photo-thermo-refractive (PTR) glass is a powerful tool for laser applications that require higher radiance than a single laser unit can achieve. The beam-combining factor (BCF) is introduced as a tool to compare various beam-combining methods and experiments. It describes the change of radiance provided by a beam-combining system but is not affected by the initial beam quality of the combined lasers. A method of optimization of VBGs providing the maximum efficiency of SBC has been described for an arbitrary number of beams. An experiment confirming the proposed modeling for a two-beam SBC system by a single VBG has demonstrated a total combined power of 301 W with a channel separation of 0.25 nm, combining efficiency of 97%, close to diffraction limited divergence with M(2)=1.18, BCF of 0.77, and spectral radiance of 770 TW/(sr·m(2)·nm), the highest to date for SBC.
منابع مشابه
Scaling the spectral beam combining channels in a multiplexed volume Bragg grating.
In order to generate high power laser radiation it is often necessary to combine multiple lasers into a single beam. The recent advances in high power spectral beam combining using multiplexed volume Bragg gratings recorded in photo-thermo-refractive glass are presented. The focus is on using multiple gratings recorded within the same volume to lower the complexity of the combining system. Comb...
متن کاملDense spectral beam combining with volume Bragg gratings in PTR glass
An incoherent combination of laser radiation from multiple sources into a single near-diffraction-limited beam is an important problem of high power laser design. Energy brightness, but not spectral brightness, can be increased using spectral beam combining (SBC). Initially, SBC was proposed on the basis of conventional surface gratings [1]; however, it was found later that volume Bragg grating...
متن کاملHigh Power Spectral Beam Combining of Fiber Lasers with Ultra High Spectral Density by Thermal Tuning of Volume Bragg Gratings
Lasers that produce 100 kW level diffraction limited power will require beam combining due to fundamental thermal and nonlinear limitations on the power of single aperture lasers. Towards this goal, we present high power, high spectral density beam combining by volume Bragg gratings of five 150 W beams with a spectral separation of 0.25 nm between beams, the narrowest to date for high power. Wi...
متن کاملChannel density and efficiency optimization of spectral beam combining systems based on volume Bragg gratings in sequential and multiplexed arrangements.
Spectral-beam-combining (SBC) systems utilizing multiple volume Bragg gratings must be carefully analyzed to maximize channel density and efficiency, and thus output radiance. This analysis grows increasingly difficult as the number of channels in the system increases, and heuristic optimization techniques are useful tools for exploring the limits of these systems. We explore three classes of m...
متن کاملModeling of Gaussian beam diffraction on volume Bragg gratings in PTR glass
A detailed model of diffraction of Gaussian beams on plane uniform volume Bragg gratings based on a Kogelnik’s theory of coupled waves is presented. The model describes transmitting and reflecting gratings and takes into account spectral width and angular divergence of diffracted beams. Exact formulas for angular and spectral selectivity are derived. Conditions for Bragg diffraction based on co...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Applied optics
دوره 52 30 شماره
صفحات -
تاریخ انتشار 2013