Determining a Surface Breaking
نویسندگان
چکیده
We seek a non-destructive testing method to detect a radial surface breaking crack in a two-dimensional circular disk. The detection method utilizes steady-state electrical boundary measurements. A nonlinear function which characterizes the size and the location of a radial surface crack is constructed based on the knowledge of two data readings of the boundary voltage intensity corresponding to a current ux of dipole pattern. Based on this output function, we can detect the presence of a radial surface crack from two data readings of voltage intensity measurement on the boundary. And two convergent algorithms are derived individually to locate and then determine the size of the crack.
منابع مشابه
Weakly-compressible SPH and Experimental modeling of periodic wave breaking on a plane slope
Breaking waves have ability to transport large quantities of sediment and significant impact on coastal structures morphology. Hence, modeling of wave breaking is an important subject in coastal and marine engineering. In this research, the periodic wave breaking process on a plane slope is studied experimentally and numerically. Laboratory experiments were conducted to record water surface ele...
متن کاملTwo-Phase CFD and PIV EFD for Plunging Breaking Waves, Including Alternative CFD Approaches and Extensions for Air/Water Ship Flow
This paper represents a first step towards the development of two-phase CFD methods for small and large scale ship hydrodynamic applications. Two-phase level set approaches are being implemented in CFDShip-Iowa to extend the modeling capabilities of the current version 4 along with complementary experiments for validation. The experiments are conducted in an open channel flume using bottom moun...
متن کاملSupersymmetry Breaking from a Calabi-Yau Singularity
We conjecture a geometric criterion for determining whether supersymmetry is spontaneously broken in certain string backgrounds. These backgrounds contain wrapped branes at Calabi-Yau singularites with obstructions to deformation of the complex structure. We motivate our conjecture with a particular example: the Y 2,1 quiver gauge theory corresponding to a cone over the first del Pezzo surface,...
متن کاملشبیهسازی عددی شکست موج تنها بر روی ساحل شیبدار به روش هیدرودینامیک ذرات هموار نسبتاً تراکمپذیر
In this article, a numerical meshless method called Weakly Compressible Smoothed Particle Hydrodynamic (WCSPH) is used to simulate the solitary wave breaking process on the beach. The present model is a two dimensional model that considers the fluid weakly compressibility. This model solves the viscous fluid equations to obtain velocity field and density and solves the equation of state to obta...
متن کاملAn Operando Raman, IR, and TPSR Spectroscopic Investigation of the Selective Oxidation of Propylene to Acrolein over a Model Supported Vanadium Oxide Monolayer Catalyst
The selective oxidation of propylene to acrolein was investigated over a well-defined supported V2O5/Nb2O5 catalyst, containing a surface vanadia monolayer, with combined operando Raman/IR/MS, temperature programmed surface reaction (TPSR) spectroscopy and isotopically labeled reactants (O2 and C3D6). The dissociative chemisorption of propylene on the catalyst forms the surface allyl (H2CdCHCH2...
متن کامل