, Hyung Jun Ahn Crack Sealing and Filling : Best Practices

In-vitro Sealing Ability of Calcium Enriched Mixture Cement Versus Amalgam as Retrograde Filling Materials

Introduction: Sealing ability of a retrograde filling material is an important factor for a successful endodontic apicoectomy. The purpose of this in-vitro study was to compare the sealing ability of calcium enriched mixture (CEM) cement versus amalgam as root-end filling materials. Methods: A total of 36 canals of extracted maxillary central incisors were instrumented and obturated using later...

Rapid in vitro corrosion induced by crack-like pathway in biodegradable Mg-10% Ca alloy.

The in vitro corrosion mechanism of the biodegradable cast Mg-10% Ca binary alloy in Hanks' solution was evaluated through transmission electron microscopy observations. The corrosion behavior depends strongly on the microstructural peculiarity of Mg₂Ca phase surrounding the island-like primary Mg phase and the fast corrosion induced by the interdiffusion of O and Ca via the Mg₂Ca phase of lame...

Evaluation of Asphalt Pavement Interface

Subsurface Condition Evaluation for Asphalt Pavement Preservation Treatments

Test method variability in slow crack growth properties of sealing glasses

The crack growth properties of several sealing glasses were measured by using constant stress rate testing in 2% and 95% RH (relative humidity). Crack growth parameters measured in high humidity are systematically smaller (n and B) than those measured in low humidity, and crack velocities for dry environments are 100 lower than for wet environments. The crack velocity is very sensitivity to sma...