Airport Surface Movement Technologies - Atlanta Demonstration Overview
نویسندگان
چکیده
A flight demonstration was conducted in August 1997 at the Hartsfield Atlanta (ATL) International Airport as part of low visibility landing and surface operations (LVLASO) research activities. This research was aimed at investigating technology to improve the safety and efficiency of aircraft movements on the surface during the operational phases of roll-out, turnoff, and taxi in any weather condition down to a runway visual range of 300 feet. The system tested at ATL was composed of airborne and ground-based components that were integrated to provide both the flight crew and controllers with supplemental information to enable safe, expedient surface operations. Experimental displays were installed on a Boeing 757-200 research aircraft in both headup and head-down formats. On the ground, an integrated system maintained surveillance of the airport surface and a controller interface provided routing and control instructions. While at ATL, the research aircraft performed a series of flight and taxi operations to show the validity of the operational concept at a major airport facility, to validate simulation findings, and to assess each of the individual technologies’ performance in an airport environment. The concept was demonstrated to over 100 visitors from the Federal Aviation Administration (FAA) and the aviation community. This paper gives an overview of the LVLASO system and ATL test activities.
منابع مشابه
Flight Testing of an Airport Surface Guidance, Navigation, and Control System
This document describes operations associated with a set of flight experiments and demonstrations using a Boeing757-200 (B-757) research aircraft as part of low visibility landing and surface operations (LVLASO) research activities. To support this experiment, the B-757 performed flight and taxi operations at the HartsfieldAtlanta International Airport (ATL) in Atlanta, GA. The B-757 was equipp...
متن کاملDemonstration ofRunway Status Lights at Logan Airport
III Lincoln Laboratory has developed a prototype runway-status light system (RSLS), designed to prevent runway incursions and accidents. These status lights will tell aircraft pilots and surface-vehicle operators when runways are unsafe to enter or unsafe for departure. This status information will improve the situational awareness of pilots and vehicle operators, thereby reducing the number of...
متن کاملAirport Surface Movement – Performance Requirements & Navigation Algorithms
This paper derives the navigation system performance requirements for the guidance function under zero visibility conditions of an Advanced Surface Movement Guidance and Control System (ASMGCS), taking as basis the airport design requirements. The stringency of these requirements suggests that code-based Global Navigation Satellite Systems (GNSS) in stand-alone mode or augmented by Spaceor Grou...
متن کاملPerformance ofthe Runway-Status Light System at Logan Airport
.. Runway incursions are a persistent problem in airport ground-movement operations. Numerous critical conflicts and several fatal accidents have occurred as a result of unauthorized or otherwise inappropriate entry of aircra& or surface vehicles onto an active runway. Many of these conflicts developed quickly, leaving little time for effective intervention by either the controller or the pilot...
متن کاملA Study of Severe Multipath Errors for the Proposed GBAS Airport Surface Movement Application
Ground Based Augmentation Systems (GBAS), such as the U.S. Local Area Augmentation System (LAAS) can be used for both precision approach and Differentially Corrected Positioning Service (DCPS) applications. Through its support of DCPS, the LAAS Ground Facility (LGF) is required to meet the integrity requirements of all other operations that could use the GBAS VHF Data Broadcast (VDB). Our previ...
متن کامل