Modeling shock unsteadiness in shock/turbulence interaction
نویسندگان
چکیده
The RANS (Reynolds averaged Navier-Stokes) equations can yield significant error when applied to practical flows involving shock waves. We use the interaction of homogeneous isotropic turbulence with a normal shock to suggest improvements in the k− model applied to shock/turbulence interaction. Mahesh et al. and Lee et al. present direct numerical simulation (DNS) and linear analysis of the flow of isotropic turbulence through a normal shock, where it is found that mean compression, shock unsteadiness, pressurevelocity correlation and upstream entropy fluctuations play an important role in the interaction. Current RANS models based on the eddy viscosity assumption yield very high amplification in the turbulent kinetic energy, k , across the shock. Suppressing the eddy viscosity in a shock improves the model predictions, but is inadequate to match theoretical results at high Mach numbers. We modify the k -equation to include a term due to shock unsteadiness, and model it using linear analysis. The dissipation rate equation is similarly altered based on linear analysis results. These modifications improve the model predictions considerably, and the new model is found to match the linear theory and DNS data well.
منابع مشابه
Modeling the Effect of Shock Unsteadiness in Shock/ Turbulent Boundary-Layer Interactions
Reynolds-averaged Navier–Stokes (RANS) methods often cannot predict shock/turbulence interaction correctly. This may be because RANS models do not account for the unsteady motion of the shock wave that is inherent in these interactions. Previous work proposed a shock-unsteadiness correction that significantly improves prediction of turbulent kinetic energy amplification across a normal shock in...
متن کاملModeling shock unsteadiness in shockÕturbulence interaction
The RANS ~Reynolds averaged Navier–Stokes! equations can yield significant error when applied to practical flows involving shock waves. We use the interaction of homogeneous isotropic turbulence with a normal shock to suggest improvements in the k – e model applied to shock/ turbulence interaction. Mahesh et al. @J. Fluid Mech. 334, 353 ~1997!# and Lee et al. @J. Fluid Mech. 340, 22 ~1997!# pre...
متن کاملModeling the effect of shock unsteadiness in shock-wave/ turbulent boundary layer interactions
Reynolds averaged Navier-Stokes methods often cannot predict shock/turbulence interaction correctly. This may be because RANS models do not account for the unsteady motion of the shock wave that is inherent in these interactions. Sinha et al. [Phys. Fluids, Vol. 15, No. 8 (2003)] propose a shock-unsteadiness correction that significantly improves turbulence prediction across a normal shock in a...
متن کاملLow-frequency unsteadiness in shock wave–turbulent boundary layer interaction
Stephan Priebe and M. Pino Martín Journal of Fluid Mechanics / Volume 699 / May 2012, pp 1 49 DOI: 10.1017/jfm.2011.560, Published online: Link to this article: http://journals.cambridge.org/abstract_S002211201100560X How to cite this article: Stephan Priebe and M. Pino Martín (2012). Lowfrequency unsteadiness in shock wave–turbulent boundary layer interaction. Journal of Fluid Mechanics, 69...
متن کاملStudy of Parameters Affecting Separation Bubble Size in High Speed Flows using k-ω Turbulence Model
Shock waves generated at different parts of vehicle interact with the boundary layer over the surface at high Mach flows. The adverse pressure gradient across strong shock wave causes the flow to separate and peak loads are generated at separation and reattachment points. The size of separation bubble in the shock boundary layer interaction flows depends on various parameters. Reynolds-averaged...
متن کامل