Electrohydraulic shock wave generation as a means to increase intrinsic permeability of mortar
نویسنده
چکیده
This article discusses the influence of compressive shock waves on the permeability of cementitious materials. Shock waves are generated in water by Pulsed Arc Electrohydraulic Discharges (PAED). The practical aim is to increase the intrinsic permeability of the specimens. The maximum pressure amplitude of the shock wave is 250 MPa. It generates damage in the specimens and the evolution of damage is correlated with the intrinsic permeability of the mortar. A threshold of pressure is observed. From this threshold, the increase of permeability is linear in a semi-log plot. The influence of repeated shocks on permeability is also discussed. Qualitative X Ray Tomography illustrates the evolution of the microstructure of the material leading to the increase of permeability. Comparative results from mercury intrusion porosimetry (MIP) show that the micro-structural damage process starts at the sub-micrometric level and that the characteristic size of pores of growing volume increases.
منابع مشابه
The Effect of Dynamic Permeability on Velocity and Intrinsic Attenuation of Compressional Waves in Sand
Stress waves contain useful information about the properties of porous materials; they can be recovered through different non-destructive testing methods such as crosswell, vertical seismic profile, borehole logging as well as sonic tests. In all these methods, it is crucial to assess the effects of frequency on wave attributes including velocity and intrinsic attenuation. The dependency of per...
متن کاملGeneration of Love Wave in a Media with Temperature Dependent Properties Over a Heterogeneous Substratum
The present paper deals with the generation of Love waves in a layer of finite thickness over an initially stressed heterogeneous semi-infinite media. The rigidity and density of the layer are functions of temperature, i.e. they are temperature dependent. The lower substratum is an initially stressed medium and its rigidity and density vary linearly with the depth. The frequency relation of Lo...
متن کاملModelling anisotropic damage and permeability of mortar under dynamic loads
This paper deals with the development of a model for concrete subjected to dynamic loads. Shock waves are generated by Pulsed Arc Electro-hydraulic Discharges (PAED) in water and applied to mortar samples. A diphasic model (liquid water and vapour) is implemented in order to describe the electrical discharge and the propagation of shock waves in water. An anisotropic damage model is devised, wh...
متن کاملNonsurgical management of an impacted mechanical lithotriptor with fractured traction wires: endoscopic intracorporeal electrohydraulic shock wave lithotripsy followed by extra-endoscopic mechanical lithotripsy.
In a patient with a mid-common bile duct stone, the traction wires of a mechanical lithotriptor snapped, resulting in lithotriptor basket impaction. Simultaneous occurrence of these two potential complications of endoscopic stone extraction is very rarely reported. Extracorporeal shock wave lithotripsy failed to fragment the stone entrapped within the impacted basket. Endoscopic intracorporeal ...
متن کاملAppropriate Labor income and Capital gain tax rates functions extraction based on Overlapping Generation Models: Dynamic Stochastic General Equilibrium (DSGE) approach
In this study, using the overlapping generation (OLG (model and the Stochastic Dynamic General Equilibrium (DSGE) approach, the optimal form of labor income tax rate and capital income tax functions is extracted for the economy of Iran using annual time series data during 1357 to 1397. The results of comparing the calibration and simulation of the designed model show that the optimal functions ...
متن کامل