Irradiation Effects on the Physio-mechanical Properties of Super-alloys Characterized by Low Thermal Expansion

نویسندگان

  • N. Simos
  • H. Kirk
چکیده

In an effort to address the limitations on high power accelerator target performance prompted by the elevated dose levels and the associated irradiation damage, an experimental study has been undertaken to evaluate the potential applicability of super alloys characterized by low thermal expansion over certain thermal regimes. The intriguing properties associated with materials such as super-Invar and the “gum” metal (Ti-12Ta-9Nb-3V-6ZrO) are observed in their un-irradiated state. Irradiations were performed using the 200 MeV protons of the BNL Linac and/or a neutron flux generated by the stopping of the primary 112 MeV protons upstream of the exposed super-alloys. The paper presents the post-irradiation analysis results which reveal interesting damage reversal by the super-invar and unexpected low threshold of radiation resistance by the “gum” metal.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fabrication of Super Invar Micro- and Nano- Structures by Electrodeposition for Low Thermal Expansion Applications

5 wt % Co, are of both theoretical research and practical interest due to the anomalous codeposition behavior, the preferential deposition of less noble metal, and to the material's low coefficient of thermal expansion, CTE. A better understanding of anomalous codeposition allows for controlling the deposition rates of individual Fe, Ni, and Co metal during codeposition and hence the compositio...

متن کامل

Studying the Mechanical and Thermal Properties of Polymer Nanocomposites Reinforced with Montmorillonite Nanoparticles Using Micromechanics Method

In this study, the mechanical and thermal behavior of the nano-reinforced polymer composite reinforced by Montmorillonite (MMT) nanoparticles is investigated. Due to low cost of computations, the 3D representative volume elements (RVE) method is utilized using ABAQUS finite element commercial software. Low density poly ethylene (LDPE) and MMT are used as matrix and nanoparticle material, respec...

متن کامل

Effect of Ni on Amorphization of Ti-Cu-Ni Ternary alloys Prepared by Mechanical alloying

Amorphous alloys has been taken into consideration because of their unique properties and are nominated as the future engineering materials. In this research, the effect of Ni and milling time on amorphization process and thermal stability of Ti50Cu50-xNix(x=10, 15, 25 at%) alloy system were investigated. The evolution of amorphization during milling, thermal stability and subsequent heat treat...

متن کامل

Comparison of Purity and Properties of Hydroxyl Carbonate Apatite Extracted from Natural Thigh Bone by Different Physio-chemical Methods

New approaches to extracting natural hydroxyl carbonate apatite from bio waste of bovine bones cortical femur have been developed. To extract pure and natural bio ceramics, three different treatments have been applied: 1-Calcination heat treatment at temperature of 700 , 2-alkaline hydrothermal at temperature of 275 and 3-Pressurized low polarity water at temperature of 250 . Raw bovine bone an...

متن کامل

Nonlinear Thermo-Mechanical Behaviour Analysis of Activated Composites With Shape Memory Alloy Fibres

General thermo-mechanical behavior of composites reinforced by shape memory alloy fibers is predicted using a three-dimensional analytical micromechanical method to consider the effect of fibers activation. Composite due to the micromechanical method can be exposed to general normal and shear mechanical and thermal loading which cause to activate the shape memory alloy fibers within polymeric m...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008