The experimental studies of thermoacoustic cooler.
نویسندگان
چکیده
The experimental studies of thermoacoustic cooler consisting of acoustic loop-tube were carried out. The loop-tube was filled with the mixture of air and helium gas or air at atmospheric pressure. The dimensions of the loop-tube were 3.3 m of length, 44 mm of inner diameter and 4 mm of thickness. A pair of stacks (stack 1 and stack 2) which were sandwiched between two heat exchangers was placed symmetrically in the loop-tube. Stack 1 was employed as a prime mover and stack 2 as a heat pump. The self-sustained sound generated by the thermoacoustic effect and the cooling phenomena at the stack 2 were observed. The distribution of the sound pressures and the waveforms in the loop-tube were measured, and the frequency component of the self-sustained sound was investigated at the starting phase. The fundamental frequency component was confirmed and it was developing as the sound pressure increasing. The higher harmonics frequency components were generated and they were also developing.
منابع مشابه
Experimental studies of a thermoacoustic Stirling prime mover and its application to a cooler
An acoustic field spontaneously induced in a thermoacoustic prime mover consisting of a looped tube and resonator is determined through simultaneously measurements of pressure P and velocity U. A thermal efficiency of the thermoacoustic prime mover of this type has been reported to reach 30%. The measurements of the acoustic field in the present system revealed that a phase lead of U relative t...
متن کاملDesign , Construction and Resonance Tracking of a Laboratory - Scale , Loudspeaker - Driven Thermoacoustic Cooler Autumn Term 2013
This thesis describes the design, construction and control of a quarter-wavelength, loudspeaker-driven thermoacoustic refrigerator. The stack and resonator design is based on linear thermoacoustic theory combined with numerical simulations in the thermoacoustic design software DeltaEC. The mechanical layout focuses on experimental flexibility and ease of maintenance, which leads to a modular sy...
متن کاملDesign of a Traveling Wave Thermoacoustic Engine Driven Cooler with Hybrid Configuration
Kees de Blok proposed a “hybrid configuration” travelling wave thermoacoustic engine and his prototype using atmosphere air as the working gas achieved an onset temperature difference as low as 65 K. However, no further research work has been reported on this type of thermoacoustic engine to reveal whether this type of engine can achieve higher efficiency, or how to couple it with acoustic load...
متن کاملStudy of a thermo acoustic Stirling cooler
A thermoacoustic-stirling cooler is built and performance measurements are performed. The cooler uses the acoustic power produced by a linear motor to pump heat through a regenerator from a cold heat exchanger to an ambient one. The cooler incorporates a compact acoustic network to create the traveling-wave phasing necessary to operate in a Stirling cycle. The network has a coaxial topology ins...
متن کاملA method for estimating the parameters of electrodynamic drivers in thermoacoustic coolers.
The electroacoustic efficiency of high-power actuators used in thermoacoustic coolers may be estimated using a linear model involving a combination of six parameters. A method to identify these equivalent driver parameters from measured total electrical impedance and velocity-voltage transfer function data was developed. A commercially available, moving-magnet driver coupled to a functional the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Ultrasonics
دوره 42 1-9 شماره
صفحات -
تاریخ انتشار 2004