Morphology of silicon grain boundaries in Sr-modified AI-Si eutectic alloys by HREM

نویسندگان

  • M Shamsuzzoha
  • David J Smith
چکیده

Crystallographic changes m the ~'3(110)/{111}, ~f3(110)/{112} and .~9(110)/{112} boundaries reduced by the presence of strontmm m the slhcon phase of St-modified A1-SI alloys have been studied by high-resolution electron microscopy The 2'3 boundaries possessing {111} and {112} planes m the pure silicon phase often exhibit asymmetric morphologies m the Sr-modlfled phase Interaction of various 23(110)/{111} boundaries results m both 23(110)/{112} and 2'9(110)/{112} boundaries The resulting ~9 boundaries also show asymmetrical mchnatlon

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Comparison of segregations formed in unmodified and Sr-modified Al-Si alloys studied by atom probe tomography and transmission electron microscopy

The mechanical properties of Al-7 wt.% Si can be enhanced by structural modifications of its eutectic phase. Addition of low concentrations of certain elements, in this case 150 wt-ppm Sr, is enough to cause a transition from a coarse plate-like Si structure to a finer coralline one. To fully understand the operating mechanism of this modification, the composition of the eutectic Si phase in un...

متن کامل

Modification of Al - Si Alloy ( LM 28 ) By MnO 2 Addition

Modification of primary silicon was studied in Al-Si hypereutectic alloys with 17 Wt % silicon content. The alloys modified through non-conventional method using oxide addition. The effect of oxide on the morphology and size of Si phases in the hypereutectic Al-Si alloys investigated. The results show that the addition of MnO2 to the hypereutectic Al-Si alloys can modify the primary Si phases. ...

متن کامل

Metallurgical Parameters Controlling the Eutectic Silicon Charateristics in Be-Treated Al-Si-Mg Alloys

The present work was carried out on Al-7%Si-0.4%Mg-X alloy (where X = Mg, Fe, Sr or Be), where the effect of solidification rate on the eutectic silicon characteristics was investigated. Two solidification rates corresponding to dendrite arm spacings (DAS) of 24 and 65 μm were employed. Samples with 24 μm DAS were solution heat-treated at 540 °C for 5 and 12 h prior to quenching in warm water a...

متن کامل

Microstructure Evolution and Microstructural Characteristics of Al–Mg–Si Aluminum Alloys Fabricated by a Modified Strain-Induced Melting Activation Process

A modified strain-induced melting activation (SIMA) process is shown to improve high-temperature formability. The microstructural characteristics of the spheroidized grains of SIMA-processed alloys affect high-temperature formability. The effects of hot extrusion parameters and chemical composition on the evolution of spheroidized grains were investigated using several 6xxx series aluminum allo...

متن کامل

Study of the Mechanism and Causes of Pore Formation in Sr-modified Al-Si Alloys

The formation of microporosity in modified Al-Si alloys has been reviewed in the present study. A major concern in modification is the increased tendency to form microporosity in the macro-shrinkage free Al-Si alloy castings. It has also been demonstrated that at low hydrogen contents (0.1cc/ 100g, Al), where only shrinkage porosity should occur, the effect of Sr-modification on porosity conten...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2002