A 256kb 6T self-tuning SRAM with extended 0.38V-1.2V operating range using multiple read/write assists and VMIN tracking canary sensors
نویسندگان
چکیده
A closed loop self-tuning 256kb 6T SRAM with 0.38V-1.2V extended operating range using combined read and write assists and canary-based VMIN tracking is presented. 337X and 4.3X power reductions are achieved using multiple assists and VMIN tracking, respectively; combining both saves 1444X in active power and 12.4X in leakage at the 0.38V. Keywords—self-tuning SRAM; combined assists; canary SRAM, VMIN tracking;
منابع مشابه
Canary SRAM Built in Self-test for SRAM Write VMIN Tracking
As we shrink down devices with technology scaling, process variation increases and it hinders SRAM VMIN scaling. Using peripheral assists, we can further lower the VMIN at the cost of energy and area. However, the SRAM VMIN varies with voltage, temperature and operating frequency variations, and it is hard to determine in real time. Prior work shows theoretically that canary SRAMs using reverse...
متن کاملA Sub-threshold 9T SRAM Cell with High Write and Read ability with Bit Interleaving Capability
This paper proposes a new sub-threshold low power 9T static random-access memory (SRAM) cell compatible with bit interleaving structure in which the effective sizing adjustment of access transistors in write mode is provided by isolating writing and reading paths. In the proposed cell, we consider a weak inverter to make better write mode operation. Moreover applying boosted word line feature ...
متن کاملAnalyzing Sub-Threshold Bitcell Topologies and the Effects of Assist Methods on SRAM VMIN
The need for ultra low power circuits has forced circuit designers to scale voltage supplies into the sub-threshold region where energy per operation is minimized [1]. The problem with this is that the traditional 6T SRAM bitcell, used for data storage, becomes unreliable at voltages below about 700 mV due to process variations and decreased device drive strength [2]. In order to achieve reliab...
متن کاملStability Analysis of 6T SRAM at 32 Nm Technology
ABSTRACT: SRAM area is expected to exceed 90% of overall chip area because of the demand for higher performance, lower power, and higher integration. To increase memory density, memory bitcells are scaled to reduce their area by 50% each technology node. High density SRAM bitcells use the smallest devices in a technology, making SRAM more vulnerable for variations. This variation effect the sta...
متن کاملA Novel 8T SRAM Cell with Improved Read and Write Margins
A highly stable 8T SRAM cell is presented to improve the Static Noise Margin (SNM). The proposed 8T SRAM cell uses a single-bit line structure to perform read and write operation. The design enhances the write ability by breaking-up the feedback loop of the inverter pair. It also improves the read stability by eliminating the effects from the bit-line. The simulations show that the proposed 8T ...
متن کامل