Hydrophilic Polyelectrolyte Multilayers Improve the ELISA System: Antibody Enrichment and Blocking Free

In this study, polyelectrolyte multilayers were fabricated on a polystyrene (PS) plate using a Layer-by-Layer (LbL) self-assembly technique. The resulting functional platform showed improved performance compared with conventional enzyme-linked immunosorbent assay (ELISA) systems. Poly(diallyldimethylammonium chloride) (PDDA) and poly(acrylic acid) (PAA) were used as cationic and anionic polyelectrolytes. On the negatively-charged (PDDA/PAA)3 polyelectrolyte multilayers the hydrophilic PAA surface could efficiently decrease the magnitude of the noise signal, by inhibiting nonspecific adsorption even without blocking reagent adsorption. Moreover, the (PDDA/PAA)3 substrate covalently immobilized the primary antibody, greatly increasing the amount of primary antibody adsorption and enhancing the specific detection signal compared with a conventional PS plate. The calibration curve of the (PDDA/PAA)3 substrate showed a wide linear range, for concentrations from 0.033 to 33 nM, a large specific signal change, and a detection limit of 33 pM, even though the conventional blocking reagent adsorption step was omitted. The (PDDA/PAA)3 substrate provided a high-performance ELISA system with a simple fabrication process and high sensitivity; the system presented here shows potential for a variety of immunosensor applications.