Design of GDI Based Low Power and High-Speed CMOS Full Adder Circuits
نویسندگان
چکیده
Power consumption and delay are two important considerations for VLSI systems. The objective of this project is to reduce the power and to reduce the delay which increases the speed. Adders are very important components in many applications such as microprocessor and digital signal processing (DSP) architectures. Full Adder is one of the core elements. It used in many of the complex arithmetic logic circuits like multiplication, division, addition. In this paper Full Adder has been generated by the Gate Diffusion Input (GDI) technique. The proposed full adder is simulated with Tanner EDA using 0.18μm CMOS Technology. By reducing the Transistor size, the power and delay are reduced. Simulation results show great improvement in terms of Power-Delay-Product (PDP).
منابع مشابه
A Low Power Full Adder Cell based on Carbon Nanotube FET for Arithmetic Units
In this paper, a full adder cell based on majority function using Carbon-Nanotube Field-Effect Transistor (CNFET) technology is presented. CNFETs possess considerable features that lead to their wide usage in digital circuits design. For the design of the cell input capacitors and inverters are used. These kinds of design method cause a high degree of regularity and simplicity. The proposed des...
متن کاملA Design of Low Power Low Area High Speed Full Adder Using GDI Technique
Full Adder is the basic building block for various arithmetic circuits such as compressors, multipliers, comparators and so on. 1-bit Full Adder cell is the important and basic block of an arithmetic unit of a system. Hence in order to improve the performance of the digital computer system one must improve the basic 1-bit full adder cell. In this, Full Adder is designed by using Hybrid-CMOS log...
متن کاملComparative Performance Analysis of XOR- XNOR Function Based High-Speed CMOS Full Adder Circuits For Low Voltage VLSI Design
This paper presents comparative study of high-speed, low-power and low voltage full adder circuits. Our approach is based on XOR-XNOR design full adder circuits in a single unit. A low power and high performance 9T full adder cell using a design style called “XOR (3T)” is discussed. The designed circuit commands a high degree of regularity and symmetric higher density than the conventional CMOS...
متن کاملDesign & study of a low power high speed full adder using GDI multiplexer
The binary adder is the critical element in most digital circuit designs including digital signal processors (DSP) and microprocessor data path units. As such, extensive research continues to be focused on improving the power delay performance of the adder. This paper proposes a new method for implementing a low power full adder by means of a set of Gate Diffusion Input (GDI) cell based multipl...
متن کاملEvaluation of Power Delay Product for Low Power Full Adder Circuits based on GDI Logic Cell using Mentor Graphics
This paper presents high speed and low power full adder cells designed with an alternative internal logic structure and Gate Diffusion Input (GDI) logic styles and hybrid CMOS logic style that lead to have a reduced Power Delay Product (PDP). The main design objective for this adder module is not only providing low-power dissipation and high speed but also full-voltage swing. In the first desig...
متن کاملHigh-Speed Ternary Half adder based on GNRFET
Superior electronic properties of graphene make it a substitute candidate for beyond-CMOSnanoelectronics in electronic devices such as the field-effect transistors (FETs), tunnel barriers, andquantum dots. The armchair-edge graphene nanoribbons (AGNRs), which have semiconductor behavior,are used to design the digital circuits. This paper presents a new design of ternary half a...
متن کامل