A Stress Analysis of Pipe Flange Connections
نویسندگان
چکیده
The use of pipe flange connections is standardized in the codes of JIS, ASME, DIN and so on. However, these codes are almost entirely dependent on experience, and subsequently some problems concerning pipe flange connections have been encountered. In the present paper, the distribution of contact stresses which governs the sealing performance is analyzed as a three-body contact problem, using an axisymmetrical three-dimensional theory of elasticity. The effects of the stiffness and the thickness of raised face metallic gaskets on the contact stresses and the effective gasket seating width are shown by numerical calculation. Moreover, stresses produced on the hub, the load factor (the relationship between an increment of bolt axial force and an internal pressure), and the maximum stress caused in bolts are analyzed. For verification, experiments are carried out. The analytical results are satisfactorily consistent with the experimental results.
منابع مشابه
Finite Element Analysis of Contact Stress in a Full-metallic Pipe Joint for Hydrogen Pipelines
Hydrogen gas has been widely recognized as an environmentally clean and renewable energy fuel, and it provides a way to reduce greenhouse gas and air pollution emission. A great deal of effort has been made to develop new techniques in the field of hydrogen energy, including hydrogen production, storage, and infrastructure. Recently a metallic gasket, which is made of type 316L stainless steel,...
متن کاملEvaluation of Column-Tree Moment Resisting Connection with End Plates and Haunched Beam (RESEARCH NOTE)
The column-tree constructional schemes allows for a reliable and convenient erection of moment resisting steel frames. Strengthening of column-tree connection with a haunch part can significantly improve seismic behavior of whole system. In the current study behavior of column-tree connections with haunched beams and end plate splices have been investigated. Special attention was paid for evalu...
متن کاملExperimental Studies on Vibration Testing of Pipe Joints using Metal Gaskets
Pipe joints have been widely utilized in industrial plants, where dynamic load of vibration is considerably harmful for sealing performance. However, there is a lock of design codes and experimental procedures developed for vibration testing of pipe joints. This paper proposes an experimental setup for testing of pipe joints, which use metal gaskets, in vibratory conditions. Also, a flexible pi...
متن کاملA Study on Manufacturing of Head-Part of Pipes Using a Rotating Manufacturing Process
Abstract—A large variety of pipe flange is required in marine and construction industry. Pipe flanges are usually welded or screwed to the pipe end and are connected with bolts. This approach is very simple and widely used for a long time; however, it results in high development cost and low productivity, and the productions made by this approach usually have safety problem at the welding area....
متن کاملNumerical study of slotted web drilled flange moment frame connection
Beam connections with reduced drilled section and slotted web have been presented after the Northridge earthquake (1994). Their new geometrical shapes have been resulted in weakening of beams and subsequently the bette rperformance of connections in the earthquakes. In this research, the advantages of both connections, mentioned above, have been studied in the Slotted Web Drilled Flange (SWDF) ...
متن کامل