Fish responses to flow velocity and turbulence in relation to size, sex and parasite load.

نویسندگان

  • F A Hockley
  • C A M E Wilson
  • A Brew
  • J Cable
چکیده

Riverine fish are subjected to heterogeneous flow velocities and turbulence and may use this to their advantage by selecting regions that balance energy expenditure for station holding while maximizing energy gain through feeding opportunities. This study investigated microhabitat selection by guppies Poecilia reticulata in terms of flow characteristics generated by hemisphere boulders in an open channel flume. Velocity and turbulence influenced the variation in swimming behaviour with respect to size, sex and parasite intensity. With increasing body length, fish swam further and more frequently between boulder regions. Larger guppies spent more time in the areas of high-velocity and low-turbulence regions beside the boulders, whereas smaller guppies frequented the low-velocity and high-turbulence regions directly behind the boulders. Male guppies selected the regions of low velocity, indicating possible reduced swimming ability owing to hydrodynamic drag imposed by their fins. With increasing Gyrodactylus turnbulli burden, fish spent more time in regions with moderate velocity and lowest turbulent kinetic energy which were the most spatially and temporally homogeneous in terms of velocity and turbulence. These findings highlight the importance of heterogeneous flow conditions in river channel design owing to the behavioural variability within a species in response to velocity and turbulence.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Numerical simulation of flow in a fishway of Karkheh-Hamidieh diversion dam and environmental considerations to investigate possibility of fishway use in Mazandaran Province

Pool and weir is a type of fishway that provides a route for fish to migrate to damupstream. The effective parameters for fish swimming include velocity, water depth andturbulence. Several rubber dams have been under construction in Mazandaran Province, butthe necessary structures have not been built around them yet. When constructing these rubberdams, numerical models can be used to evaluate f...

متن کامل

Analysis of the Characteristics, Physical Concepts and Entropy Generation in a Turbulent Channel Flow Using Vortex Blob Method

In this paper, using vortex blob method (VBM), turbulent flow in a channel is studied and physical concepts of turbulence are obtained and discussed. At first, time-averaged velocities,  and , and then their fluctuations are calculated. To clarify turbulence structures, velocity fluctuations and  are plotted. It is observed that turbulence structures occupy different positions and move with con...

متن کامل

Numerical and Experimental Analysis of the Effect of Flow Discharge Ratio on Flow Separation at 45 Degree Open End Water Intake

Flow separation at water intake is the main cause of head loss and flow discharge reduction. &#10As a result, study of shape and size of separation is very essential when designing an optimum water intake. Water intake is normally built with a 90 degree angle to the main channel flow direction. However, the flow structure in this type of water intake consists of large separation size along wit...

متن کامل

Numerical and Experimental Analysis of the Effect of Flow Discharge Ratio on Flow Separation at 45 Degree Open End Water Intake

Flow separation at water intake is the main cause of head loss and flow discharge reduction. As a result, study of shape and size of separation is very essential when designing an optimum water intake. Water intake is normally built with a 90 degree angle to the main channel flow direction. However, the flow structure in this type of water intake consists of large separation size along with ...

متن کامل

Analytical Prediction of Indentation and Low-Velocity Impact Responses of Fully Backed Composite Sandwich Plates

In this paper, static indentation and low velocity impact responses of a fully backed composite sandwich plate subjected to a rigid flat-ended cylindrical indenter/impactor are analytically investigated. The analysis is nonlinear due to nonlinear strain-displacement relation. In contrast to the existed analytical models for the indentation of composite sandwich plates, the stacking sequence of ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of the Royal Society, Interface

دوره 11 91  شماره 

صفحات  -

تاریخ انتشار 2014