Application of Phosphonium Ionic Liquids as Ion Carriers in Polymer Inclusion Membranes (PIMs) for Separation of Cadmium(II) and Copper(II) from Aqueous Solutions
نویسنده
چکیده
Facilitated transport through polymer inclusion membranes (PIMs) is a promising method for simultaneous separation and removal of valuable and toxic metal ions from aqueous solutions. Recently, ionic liquids (ILs) have been used as extracting agents for metal ions due to their unique physicochemical properties. This paper presents research on the facilitated transport of cadmium(II) and copper(II) ions from aqueous chloride solutions through PIMs with phosphonium ILs as new selective ion carriers. Cellulose triacetate membranes containing o-nitrophenyl octyl ether (ONPOE) as a plasticizer and Cyphos IL 101 [trihexyl(tetradecyl)phosphonium chloride] or Cyphos IL 104 [trihexyl(tetradecyl)phosphonium bis(2,4,4-trimethylpentyl)phosphinate] as the ion carriers have been prepared and applied for investigations. Cd(II) ions were transported preferably from hydrochloric acid solutions containing Cu(II) ions through the PIMs. Higher selectivity coefficient of Cd(II) over Cu(II) (SCd/Cu) from 0.1 mol·dm-3 hydrochloric acid was obtained for PIM with Cyphos IL 104 as the ion carrier. The influence of HCl and NaCl concentrations in the source phase on metal ion transport across PIM doped with Cyphos 104 was studied. It was found that the initial fluxes of Cd(II) and Cu(II) increase with increasing chloride ions concentration in the source phase. The selectivity coefficient for Cd(II) over Cu(II) decreases with increasing HCl concentration in the source phase. The results suggest that the separation system presented in this paper can be useful for the removal of Cd(II) from acidic chloride solutions in the presence of Cu(II).
منابع مشابه
Preparation of Nanochitosan as an Effective Sorbent for the Removal of Copper Ions from Aqueous Solutions
The most important pollutants in wastewater are heavy metal ions. In this paper, the effects of various parameters such as pH, contact time, initial concentration, and temperature on the adsorption of Cu (II) by nanochitosan (NCS) was investigated in batch experiment. Nanochitosan was prepared based on ionic gelation and characterized by means of Fourier Transform Infrared Spectroscopy (FTIR),...
متن کاملRemoval of copper ions from aqueous solutions using polypyrrole and its nanocomposites
In this article, preparation of polypyrrole and its nanocomposites as adsorbents werediscussed and the capability of separation of copper ions from aqueous solution were studied.Polypyrrole was prepared by chemical oxidative polymerization method of pyrrole usingFeCl3 as an oxidant. The removal of Cu (II) was investigated using PPy, PPy/TiO2 andPPy/TiO2/DHSNa nanocomposites. The products were i...
متن کاملUultra-trace determination of cadmium (II) in aqueous environmental samples by a new ion selective electrode based on nefazodone and 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid
Background and Objective: Cadmium is a potential environmental contaminant that causes adverse effects on the environment and the health of living organisms. Therefore, designing a simple and economic technique for its determination is very important. In this respect, a potentiometric sensor based on nefazodone as the ionophore and [BMIM]PF6 as the ionic additive were developed for the determin...
متن کاملRemoval of Heavy Metal Particles by LTJ, ANA, SVR, BEC and MER zeolites particles: A Molecular Dynamics Simulation Study
In present study, molecular dynamics simulation of Cadmium (II), Lead (II) and Copper (II) removal from aqueous electrolyte solutions using the ion-exchange process with the zeolite particles was done. The results showed that, most of the particles had the highest affinity of ion exchanging with Lead (II) and the lowest affinity with Copper (II). The calculated mean ion-exchange ratios showed t...
متن کاملSelective and Efficient Solvent Extraction of Copper(II) Ions from Chloride Solutions by Oxime Extractants
Oxime extractants 3-tert-butyl-2-hydroxy-5-methyl benzaldehyde oxime (HL1) and 3-tert-butyl-2-hydroxy-5-methoxy benzaldehyde oxime (HL2) were synthesized and characterized by conventional spectroscopic methods. Suitable lipophilic nature of the prepared extractants allowed examining the ability of these molecules for extr...
متن کامل