Traceability Chain of the Capacitance Unit to Quantum Hall Effect at Inmetro - Four-terminal Coaxial Bridge
نویسندگان
چکیده
− This paper describes the development of a four-terminal coaxial bridge, part of the traceability chain of the capacitance unit to the quantum Hall effect, in construction at Inmetro. This bridge will also be used to calibrate AC resistance and high-value capacitance standards. Here we describe the final construction stages and preliminary measurements of the four-terminal coaxial bridge. We also describe the bridge main transformers, grounding scheme, and AC resistance standards.
منابع مشابه
A Two-stage Inductive Voltage Divider for Coaxial Bridges
The traceability chain to derive the capacitance unit from the quantum Hall resistance coaxial bridges. These bridges employ a inductive voltage divider to provide the voltage ratio needed. One such divider has recently been constructed calibrated at Inmetro. The design techniques responsible for the small ratio errors of the device are detailed
متن کاملCalibration of Capacitance Standards with a Quadrature Bridge
− National Metrology Institutes employ the quadrature bridge in the traceability chain to derive the farad from the ohm (represented with the quantum Hall effect). The bridge calibrates the capacitance product of the two capacitors being measured; a separate measurement with a ratio bridge is usually required to estimate each capacitor independently. We describe here a method which, by measurin...
متن کاملDesign of a digital four-terminal-pair impedance bridge
The paper describes the design of a four-terminal-pair impedance bridge developed at INMETRO. Originally devised to work as a quadrature bridge for deriving the unit of capacitance (Farad) from a resistance (Ohm) or vice-versa, it allows the comparison of impedances in general with outstanding accuracy and measurement uncertainties bearing some 10 /
متن کاملDESIGN & DEVELOPMENT OF A STANDARD FOR HVDC VOLTAGE UP TO 50 kV
This work presents the prototype of a standard for HVDC, designed to be used in the range of 1kV to 50 kV and calibrated in low voltages. In HV, it will be the link in the chain of traceability between the INMETRO standard and the dividers used by industrial laboratories.
متن کاملUnequalized Currents in Two Terminal-pair Coaxial Capacitance Bridges
It is necessary to maintain conditions of zero net currents in the cables of ac coaxial bridges. Current equalizers are used for dealing with this problem. It is shown here how they were applied in the construction of a two terminal-pair capacitance bridge with an uncertainty of about one part in 10.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009