Preparation of porous hydroxyapatite scaffolds
نویسندگان
چکیده
In this work, the sintering and grain growth of hydroxyapatite green bodies are analyzed in order to identify the optimum heat treatments for the preparation of porous hydroxyapatite scaffolds. Sintering in air at temperatures ranging between 1100 and 1200 °C yields dense materials with narrow grain-size distributions. The scaffolds are formed by the infiltration of polymer foams with hydroxyapatite slurries or by robocasting, a novel rapid-prototyping technique. Examples of the microstructures achieved with each approach are presented. It is observed that both techniques can be used to fabricate scaffolds with adequate pore size to promote bone ingrowth. © 2006 Elsevier B.V. All rights reserved.
منابع مشابه
Fabrication of Porous Hydroxyapatite-Gelatin Scaffolds Crosslinked by Glutaraldehyde for Bone Tissue Engineering
In this study, to mimic the mineral and organic components of natural bone, hydroxyapatite[HA] and gelatin[GEL] composite scaffolds were prepared using the solvent-casting method combined with a freeze drying process. Glutaraldehyde[GA] was used as a cross linking agent and sodium bisulfite was used as an excess GA discharger. Using this technique, it is possible to produce scaffolds with mecha...
متن کاملImproving the mechanical and bioactivity of hydroxyapatite porous scaffold ceramic with diopside/forstrite ceramic coating
Objective(s): Scaffolds are considered as biological substitutes in bone defects which improve and accelerate the healing process of surrounding tissue. In recent years a major challenge in biomaterials is to produce porous materials with properties similar to bone tissue. In this study, the natural bioactive hydroxyapatite scaffolds with nano Diopside /Forstrite coating was successfully synthe...
متن کاملAdditive manufactured Ti6Al4V scaffolds with the RF- magnetron sputter deposited hydroxyapatite coating
Present paper reports on the results of surface modification of the additively manufactured porous Ti6Al4V scaffolds. Radio frequency (RF) magnetron sputtering was used to modify the surface of the alloy via deposition of the biocompatible hydroxyapatite (HA) coating. The surface morphology, chemical and phase composition of the HA-coated alloy were studied. It was revealed that RF magnetron sp...
متن کاملPreparation of porous tri-calcium phosphate ceramic scaffold for bone tissue engineering
Calcium Phosphate ceramic has been widely used in bone tissue engineering due to its excellent biocompatibility and biodegradability. However, low mechanical properties and biodegradability limit their potential applications. In this project, hydroxyapatite (HA) and calcium phosphate bioglass were used to produce porous tri-calcium phosphate (TCP) bioceramic scaffolds. It was found that porous ...
متن کاملFabrication of Porous Hydroxyapatite-Gelatin Composite Scaffolds for Bone Tissue Engineering
Background: engineering new bone tissue with cells and a synthetic extracellular matrix represents a new approach for the regeneration of mineralized tissues compared with the transplantation of bone (autografts or allografts). Methods: in this study, to mimic the mineral and organic component of natural bone, hydroxapatite (HA) and gelatin (GEL) composite scaffolds were prepared. The raw mater...
متن کامل