A Case Study in the Capacity Design of Rc Coupled Walls

نویسندگان

  • Matthew J. FOX
  • Timothy J. SULLIVAN
  • Katrin BEYER
چکیده

In the seismic design of structures, capacity design is typically employed to ensure that a desirable ductile response is obtained. In this paper three different capacity design approaches for reinforced concrete coupled walls are investigated. For a simple case study building, the expected capacity design shear forces and bending moments are calculated using the different approaches. The results are then assessed against the corresponding actions found from nonlinear time-history analysis. The performance of each approach is discussed, along with some of the difficulties associated with undertaking the capacity design of coupled walls.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

PERFORMANCE BASED OPTIMAL SEISMIC DESIGN OF RC SHEAR WALLS INCORPORATING SOIL–STRUCTURE INTERACTION USING CSS ALGORITHM

In this article optimal design of shear walls is performed under seismic loading. For practical aims, a database of special shear walls is created. Special shear walls are used for seismic design optimization employing the charged system search algorithm as an optimizer. Constraints consist of design and performance limitations. Nonlinear behavior of the shear wall is taken into account and per...

متن کامل

IMPROVED BIG BANG-BIG CRUNCH ALGORITHM FOR OPTIMAL DIMENSIONAL DESIGN OF STRUCTURAL WALLS SYSTEM

Among the different lateral force resisting systems, shear walls are of appropriate stiffness and hence are extensively employed in the design of high-rise structures. The architectural concerns regarding the safety of these structures have further widened the application of coupled shear walls. The present study investigated the optimal dimensional design of coupled shear walls based on the im...

متن کامل

Development of a displacement-based design approach for modern mixed RC-URM wall structures

The recent re-assessment of the seismic hazard in Europe led for many regions of low to moderate seismicity to an increase in the seismic demand. As a consequence, several modern unreinforced masonry (URM) buildings, constructed with reinforced concrete (RC) slabs that provide an efficient rigid diaphragm action, no longer satisfy the seismic design check and have been retrofitted by adding or ...

متن کامل

A Simple Approach to Predict the Shear Capacity and Failure Mode of Fix-ended Reinforced Concrete Deep Beams based on Experimental Study

Reinforced Concrete (RC) deep beams are commonly used in structural design to transfer vertical loads when there is a vertical discontinuity in the load path. Due to their deep geometry, the force distribution within the RC deep beams is very different than the RC shallow beams. There are some strut and tie model (STM) already been developed for RC deep beams. However, most of these models are ...

متن کامل

The optimum configuration of FRP laminates of coupling shear wall concerning the load capacity

Using of CFRP carbon sheets because of their high strength, lightness and ease of use have been very expanded in retrofitting concrete members. Including shear walls systems FRP can be used in order to rebuild or maintain the strength of an aged structural member. Repairing, or retrofitting of the intact structural member is conducted to enhance the structural resistance that was deteriorated d...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014