Some asymptotic results for bifurcations in pure bending of rubber blocks
نویسندگان
چکیده
The bifurcation of an incompressible neo-Hookean thick hyperelastic plate with a ratio of thickness to length η and subject to pure bending is considered within a plane-strain framework. The two incremental equilibrium equations corresponding to a nonlinear prebuckling state of strain are reduced to a fourth-order linear eigenproblem that displays a multiple turning point. It is found that for 0 < η < ∞ the plate experience an Euler-type buckling instability which in the limit η → ∞ degenerates into a surface instability. Singular perturbation methods enable us to capture this transition, while direct numerical simulations corroborate the analytical results.
منابع مشابه
Asymptotic results for bifurcations in pure bending of rubber blocks
The bifurcation of an incompressible neo-Hookean thick hyperelastic plate with a ratio of thickness to length η and subject to pure bending is considered within a plane-strain framework. The two incremental equilibrium equations corresponding to a nonlinear prebuckling state of strain are reduced to a fourth-order linear eigenproblem that displays a multiple turning point. It is found that for ...
متن کاملGrazing Bifurcations and Chaos of a Hydraulic Engine Mount
The constitutive relationships of the rubber materials that act as the main spring of a hydraulic engine mount are nonlinear. In addition to material induced nonlinearity, further nonlinearities may be introduced by mount geometry, turbulent fluid behavior, temperature, boundary conditions, decoupler action, and hysteretic behavior. In this research all influence the behavior of the system only...
متن کاملProduction method of rubber and sulfur FG composites
In the presented work, sulfur concrete and rubber were used for producing functionally graded materials (FGM). The physical and mechanical properties of sulfur concrete and rubber were changed continuously across the thickness. On one side, there was just rubber and, on the other, there was pure sulfur; the properties of each substance were moved to reach another. This kind of material was cons...
متن کاملAnalysis of pressure distribution and optimization of working conditions during push bending of circular tubes
Thin-walled tube bending is still to be considered a new and advanced technique. The process has been adopted into several industries such as aero and automotive. This process may produce a wrinkling, bulking and tearing phenomenon if the process parameters are inappropriate, especially for tubes with large diameter and thin wall thickness. Push bending process is one of the methods used for be...
متن کاملHot Spot Stress Determination for a Tubular T-Joint under Combined Axial and Bending Loading
Finite element analysis of a tubular T-joint subjected to various loading conditions including pure axial loading, pure in-plane bending (IPB) and different ratios of axial loading to in-plane bending loading has been carried out. This effort has been established to estimate magnitudes of the peak hot spot stresses (HSS) at the brace/chord intersection and to find the corresponding locations as...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2008