High Temperature Self-Lubricating Materials
نویسندگان
چکیده
منابع مشابه
Study on Tribological Characteristics of Self-lubricating AA2218-Fly ash-White graphite Composites
In the present scenario composite materials are extensively used for structural applications in automobile and aerospace industries. Composite material exhibits a high strength to weight ratio, improved hardness, reduced weight and low coefficient of friction. Because of their enhanced tribological properties helps to achieve low manufacturing cost and superior performance. The present research...
متن کاملFriction and Wear of Self-Lubricating Materials for Hydropower Applications under Different Lubricating Conditions
Self-lubricating bearings in hydropower applications are often lubricated with water under boundary lubricating conditions. Polyhydric alcohols replacing water have shown the potential to reduce both friction and wear. The objective of this work is, therefore, to evaluate the effect of a polyhydric alcohol-based environmentally-acceptable lubricant (EAL) on the friction and wear of self-lubrica...
متن کاملEvaluation of Thermal and Rheological Properties of Lubricating Greases Modified with Recycled LDPE
The influence that recycled low-density polyethylene (LDPE) and lithium thickener concentrations exerts on the thermal and rheological properties of lithium lubricating greases was investigated using different rheological techniques in a temperature range of 25–175◦C. In this way, different lubricating grease formulations were manufactured by modifying the concentration of lithium 12-hydroxyste...
متن کاملWear and Friction Analysis of Sintered Metal Powder Self Lubricating Bush Bearing
Abstract—Powder metallurgy (P/M) is the only economic way to produce porous parts/products. P/M can produce near net shape parts hence reduces wastage of raw material and energy, avoids various machining operations. The most vital use of P/M is in production of metallic filters and self lubricating bush bearings and siding surfaces. The porosity of the part can be controlled by varying compacti...
متن کاملSelf-lubricating, low-friction, wear-resistant Al-based quasicrystalline coatings
After gas atomization, a quasicrystalline powder based on aluminium was used to prepare a thick coating by high-velocity oxygen-fuel flame torch spraying. This layer was deposited on top of a bond-coat layer on a steel plate. A post-spraying annealing treatment turned the two layers to their stable state, a γ-brass crystal and an icosahedral quasicrystal, respectively. The projection parameters...
متن کامل