Characterization of multilayer coatings by X-ray reflection
نویسنده
چکیده
2014 Methods to deduce the parameters of a multilayer X-ray mirror from its reflectivity curve are reviewed. Inversion methods are successful for coatings with few layers and give the thickness of each layer and the roughness of each interface. A statistical description of the coating is used for coatings with many layers, and simple formulas are given to derive the average thickness error and boundary roughness in a multilayer mirror. Revue Phys. Appl. 23 (1988) 1687-1700 OCTOBRE 1988, PAGE
منابع مشابه
A Study of the Tribological Properties of Sputter-deposited MoSX/Cr Coatings
In this investigation, MoSx/Cr coatings were deposited by direct-current magnetron sputter onto Ck45 (AISI 1045) plain carbon steel substrates. The MoSx/Cr ratio in the coatings was controlled by sputtering the composite targets. The chemical characterization was performed using EDX (energy dispersive X-ray analysis); the structural characterization was accomplished by X-ray diffraction (XRD) s...
متن کاملبهینهسازی بازتابش آینههای نانو - چند لایهای متناوب پرتو ایکس در سه انرژی لبه جذبTi-Kα و Co-Kα و Cr-Kα
In this paper, a practical simulation method for optimizing of x-ray reflection of nano-multilayer mirrors in three different edge energies: Cr-Kα, Co-Kα, and Ti-Kα is discussed in order to obtain the most reflection based on quarter-wave thickness method (QW). In this method, the reflected x-ray will have a constructive interference, and a peak, called Brag peak, will appear in reflection curv...
متن کاملLaboratory-based X-ray reflectometer for multilayer characterization in the 15-150 keV energy band.
A laboratory-based X-ray reflectometer has been developed to measure the performance of hard X-ray multilayer coatings at their operational X-ray energies and incidence angles. The instrument uses a sealed-tube X-ray source with a tungsten anode that can operate up to 160 kV to provide usable radiation in the 15-150 keV energy band. Two sets of adjustable tungsten carbide slit assemblies, space...
متن کاملCharacterisation and Corrosion Performance of MultilayerNano Nickel Coatings on AZ31 Magnesium Alloy
Ni-P and Ni layers multilayer coatings were applied to AZ31 magnesium alloy utilizing electroless and electrodeposition procedures. The aim of the project was to decrease cracks and increase corrosion resistance of the coatings. In order to compare the coatings, the effect of single layer electroless Ni-P coatings with different thicknesses was also investigated. The microstructure and phase co...
متن کاملSynthesis and characterization of red pearlescent pigments based on muscovite and zirconia-nanoencapsulated hematite
Applications of mica-based pearlescent pigments are related to plastics, cosmetics, automobiles coatings among others, but they seem to be not explored by the ceramic industry. In this work, intensively red and gold colored muscovite pigments covered with layer of nanoparticles containing iron and zirconium oxides were prepared by homogeneous precipitation. The final color was obtained after th...
متن کامل