A Temperature Overshoot on a Catalyst Pellet
نویسندگان
چکیده
An unexpected temperature overshoot was found for a Pd on alumina catalyst pellet in its course towards a new steady state, after a change in concentration of one of the reactants. The reaction mixture consisted of ethylene, hydrogen and nitrogen as inert. A speculative model is introduced, which can explain these overshoots by a slow adsorption of one of the reactants on the active sites of the catalyst.
منابع مشابه
The Role of Partial Internal Wetting in Hysteresis Behavior of Catalyst Pellet
The phenomenon of capillary condensation is studied through the weight change of condensed phase in an internally wetted porous pd catalyst pellet during the course of exothermic reacation of cyclohexane hydrogenation in a thermogravimetric analyzer (TGA). The direct measurement of condensed phase indicates that evaporation of condensed phase is confined to the macropores of catalyst pellet at ...
متن کاملModeling of the Unsteady State Methanol Synthesis at the Level of Catalyst Pellet
In a fixed bed of porous catalyst pellets, there are developed two composition and temperature fields, one in the fluid phase and the other one at the level of solid pellets. The objective of this work is to evaluate, by numerical simulation, the unsteady state behavior of a catalyst pellet in typical operating conditions for methanol synthesis reactors. The process kinetics was described by th...
متن کاملPractical Achievable Performance in Diesel Oxidation Catalyst Temperature Control
Practical Achievable Performance in Diesel Oxidation Catalyst Temperature Control — This paper proposes a simple control-oriented model for a Diesel Oxidation Catalyst (DOC). This distributed parameter model accounts for spatially distributed heat generation due to oxidation of reductants. It aims at being used in the context of DOC outlet temperature control, which is required during Diesel Pa...
متن کاملThe effect of chemical composition and burning temperature on pellet quality
The effect of pellet chemical composition and burning temperature on pellets’ properties of the Gol-e-Gohar hematite recovery plant was investigated in this study. Green pellets of different sodium hydroxide ratio and hydrated lime were prepared as well. Then the pellets were burnt in a muffle kiln under different temperature conditions. The Design Expert software was employed to explore ...
متن کاملDIFFUSION AND REACTION WITHIN A SHAPED NICKEL PEROVSKITE CATALYST
Abstract : In this study, we prepared a LaNi0.3Al0.7O3 perovskite catalyst using a sol-gel related method (with prop ionic acid as a solvent) for use in the methane dry reforming reaction to produce synthesis gas. We defined the catalyst structure on the basis of X-ray diffraction analysis and measurements of the specific surface area and particle size distribution. The mixed oxide structure ...
متن کامل