Quantization in Model Based Networked Control Systems
نویسندگان
چکیده
Model-Based Networked Control Systems (MB-NCS) use a model of the plant to compensate for the lack of information between transmission times. This results in a significant reduction of the bandwidth used for stabilizing the control system. Previously published stability results for MB-NCS assume no quantization error. In this paper quantization is introduced for MBNCS. Sufficient stability conditions for static uniform, static logarithmic, and dynamic quantizers for continuous linear time-invariant plants are derived. The results illustrate the effects of quantization over the stability of MB-NCS and suggest a design model that starts with the nonquantized MB-NCS. Copyright © 2005 IFAC
منابع مشابه
Modelling and Compensation of uncertain time-delays in networked control systems with plant uncertainty using an Improved RMPC Method
Control systems with digital communication between sensors, controllers and actuators are called as Networked Control Systems (NCSs). In general, NCSs encounter with some problems such as packet dropouts and network induced delays. When plant uncertainty is added to the aforementioned problems, the design of the robust controller that is able to guarantee the stability, becomes more complex. In...
متن کاملMarkovian Delay Prediction-Based Control of Networked Systems
A new Markov-based method for real time prediction of network transmission time delays is introduced. The method considers a Multi-Layer Perceptron (MLP) neural model for the transmission network, where the number of neurons in the input layer is minimized so that the required calculations are reduced and the method can be implemented in the real-time. For this purpose, the Markov process order...
متن کاملTime Delay and Data Dropout Compensation in Networked Control Systems Using Extended Kalman Filter
In networked control systems, time delay and data dropout can degrade the performance of the control system and even destabilize the system. In the present paper, the Extended Kalman filter is employed to compensate the effects of time delay and data dropout in feedforward and feedback paths of networked control systems. In the proposed method, the extended Kalman filter is used as an observer ...
متن کاملDesigninga Neuro-Sliding Mode Controller for Networked Control Systems with Packet Dropout
This paper addresses control design in networked control system by considering stochastic packet dropouts in the forward path of the control loop. The packet dropouts are modelled by mutually independent stochastic variables satisfying Bernoulli binary distribution. A sliding mode controller is utilized to overcome the adverse influences of stochastic packet dropouts in networked control system...
متن کاملNetworked Control Systems: A Model-Based Approach
In this paper a class of networked control systems called Model-Based Networked Control Systems (MB-NCS) is considered. This control architecture uses an explicit model of the plant in order to reduce the network traffic while attempting to prevent excessive performance degradation. MB-NCS can successfully address several important control issues in an intuitive and transparent way. In this pap...
متن کاملStabilization of Networked Control Systems with Variable Delays and Saturating Inputs
In this paper, improved conditions for the synthesis of static state-feedback controller are derived to stabilize networked control systems (NCSs) subject to actuator saturation. Both of the data packet latency and dropout which deteriorate the performance of the closed-loop system are considered in the NCS model via variable delays. Two different techniques are employed to incorporate actuator...
متن کامل