Validity, Sensitivity and Reproducibility of Stages and Garmin Vector Power Meters When Compared with Srm Device

نویسندگان

  • Anthony Bouillod
  • Julien Pinot
  • Georges Soto-Romero
  • Frederic Grappe
چکیده

The measurement of power output (PO) during cycling has led some manufacturers to develop mobile power meters. However, such devices have to provide a valid, sensitive and reproducible PO. This study aimed to determine the validity, sensitivity and reproducibility of the Stages and Garmin Vector during both laboratory and field cycling tests. The results demonstrate that the Stages and the Garmin Vector systems appear to be reproducible. However, the validity and the sensitivity of the two systems must be treated with some caution.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Validity, Sensitivity, Reproducibility, and Robustness of the PowerTap, Stages, and Garmin Vector Power Meters in Comparison With the SRM Device.

A large number of power meters have been produced on the market for nearly 20 y according to user requirements. PURPOSE To determine the validity, sensitivity, reproducibility, and robustness of the PowerTap (PWT), Stages (STG), and Garmin Vector (VCT) power meters in comparison with the SRM device. METHODS A national-level male competitive cyclist completed 3 laboratory cycling tests: a su...

متن کامل

Validity and reproducibility of the Powertap P1 power meter when compared with SRM device

Purpose: The use of power meters allows the assessment of cycling performance according to the record power profile [1]. Some power meters allow the measurement of power output (PO) in the pedals such as Look Keo Power (Look, Cedex, France) [2] and Garmin Vector (Olathe, USA) [3]. However, the results about these two systems [2, 3] should be treated with some caution given the presence of mean ...

متن کامل

Validity and reproducibility of the ErgomoPro power meter compared with the SRM and Powertap power meters.

PURPOSE The ErgomoPro (EP) is a power meter that measures power output (PO) during outdoor and indoor cycling via 2 optoelectronic sensors located in the bottom bracket axis. The aim of this study was to determine the validity and the reproducibility of the EP compared with the SRM crank set and Powertap hub (PT). METHODS The validity of the EP was tested in the laboratory during 8 submaximal...

متن کامل

Validity and reliability of the PowerTap mobile cycling powermeter when compared with the SRM Device.

The SRM power measuring crank system is nowadays a popular device for cycling power output (PO) measurements in the field and in laboratories. The PowerTap (CycleOps, Madison, USA) is a more recent and less well-known device that allows mobile PO measurements of cycling via the rear wheel hub. The aim of this study is to test the validity and reliability of the PowerTap by comparing it with the...

متن کامل

Validity and reliability of the Wattbike cycle ergometer.

The purpose of this study was to assess the validity and reliability of the Wattbike cycle ergometer against the SRM Powermeter using a dynamic calibration rig (CALRIG) and trained and untrained human participants. Using the CALRIG power outputs of 50-1 250  W were assessed at cadences of 70 and 90  rev x min(-1). Validity and reliability data were also obtained from 3 repeated trials in both t...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015