Iterative inversion method for eddy current profiling of near-surface residual stress in surface-treated metals

Because of their frequency-dependent penetration depth, eddy current measurements are capable of mapping the near-surface depth profile of the electric conductivity. This technique can be used to nondestructively characterize the subsurface residual stress distribution in certain types of shot-peened metals, e.g., in nickel-base superalloys. In this paper, a highly convergent iterative inversion procedure is presented to predict the frequency-independent intrinsic electric conductivity depth profile from the frequency-dependent apparent eddy current conductivity (AECC) spectrum. The proposed technique exploits three specific features of the subsurface electric conductivity variation caused by near-surface residual stresses in shot-peened metals. First, compressive residual stresses are limited to a shallow surface region of depth much less than typical probe coil diameters. Second, the change in electric conductivity due to residual stresses is always very small, typically less than 1%. Third, the electric conductivity depth profile is continuous and fairly smooth. The accuracy of the proposed iterative inversion procedure is one order of magnitude better than that of the previously developed simpler method (J Appl Phys 2004;96:1257). r 2006 Elsevier Ltd. All rights reserved.