Effect of strontium and cooling rate upon eutectic temperatures of A319 aluminum alloy
نویسنده
چکیده
DTA analysis was used to investigate the solidification reactions of alloy A319 with either 12 or 136 ppm of Sr added. Strontium does not affect primary solidification of (Al) dendrites but modifies the kinetics of the (Al)–Si eutectic. The effects of Sr level and of cooling rate on the characteristic temperatures for the (Al)–Si and other eutectic reactions are described.
منابع مشابه
The Solidification Behavior of AA2618 Aluminum Alloy and the Influence of Cooling Rate
In AA2618 aluminum alloy, the iron- and nickel-rich intermetallics formed during solidification are of great effect on the mechanical properties of the alloy at both room temperature and elevated temperatures. However, the solidification behavior of the alloy and the formation mechanism of the intermetallics during solidification of the alloy are not clear. This research fills the gap and contr...
متن کاملEFFECT OF THE INCLINED COOLING PLATE CHARACTERISTICS ON THE THIXOTROPIC MICROSTRUCTURE OF A356.0 ALUMINUM ALLOY
In the present work microstructural evolution of A356 Aluminum alloy using an inclined cooling plate casting process for thixoforming feedstock production is investigated. The resultant microstructure was evaluated and compared with those of the same alloy produced by the conventional casting process, i.e. directly cast in the same mold without using an inclined cooling plate. It was found that...
متن کاملEFFECT OF COOLING RATE AND GRAIN REFINEMENT ON THE MICROSEGREGATION IN Al-4.8 wt.% Cu ALLOY
Microsegregation is one of the most important phenomena occurs during solidification. It usually results in formation of some unexpected second phases which generally affect the mechanical properties and specially reduce the workability of casting products. The aim of this research is to study the effect of cooling rate and grain refinement on the microsegregation in Al-4.8 wt.% Cu. For this p...
متن کاملبررسی ریزساختار کامپوزیت ریختگی درجا با زمینه آلیاژ آلومینیوم A319 مقاوم شده با ترکیبات بینفلزی حاوی آهن، تولید شده بهروش همزدن در ناحیه نیمهجامد
The effect of stir casting process on the modification of the Fe-containing intermetallics formed in a cast in-situ composite based on Al-319 matrix alloy was studied in the present work. Microstructural observations using optical and scanning electron microscopes showed that the undesirable needle-like shape of the Fe-containing intermetallics (β) and also the coarse star-like α com...
متن کاملInfluence of Modifying Mixtures on Si Crystal Formation in Al-7%Si Alloy
Using scanning and transmission electron microscopy, we studied silicon particles formed during the solidification of Al-7%Si alloy when different modifying mixtures were introduced into the melt: (1) a mixture of ultrafine powders Na3AlF6 + K2ZrF6 + TiO2 + ZrO2; (2) K2ZrF6; and (3) the flux Arsal. By differential scanning calorimetry, it was established that modifying mixtures significantly in...
متن کامل