Alignment-retainable nitrogenation of cylindrical carbon nanotubes by thermal reaction with ammonia following UV oxidation: chemical alteration effects on electrical conductivity.
نویسندگان
چکیده
Cylindrical carbon nanotubes (CNTs) pretreated by UV irradiation were able to react with NH(3) to give nitrogen-containing CNTs without destroying their vertically aligned morphology. This process provided incorporation of nitrogen mostly at pyridinic and pyrrolic sites and promoted disordering, which was correlated with decreased electrical conductivity of CNT yarns.
منابع مشابه
Hybrid nanofluid based on CuO nanoparticles and single-walled Carbon nanotubes: Optimization, thermal, and electrical properties
The purpose of this study is to use the thermal and electrical conductivities of copper oxide nanoparticles and carbon nanotubes for the preparation of high-performance nanofluids for achieving better heat transfer properties. These nanofluids consist of a water/Ethylene Glycol solution containing single-wall carbon nanotubes (SWCNTs) and copper oxide nanoparticles (CuONPs). The effects of such...
متن کاملEffects of functionalization on thermal properties of single-wall and multi-wall carbon nanotube-polymer nanocomposites.
Carboxylic functionalization (-COOH groups) of carbon nanotubes is known to improve their dispersion properties and increase the electrical conductivity of carbon-nanotube-polymer nanocomposites. We have studied experimentally the effects of this type of functionalization on the thermal conductivity of the nanocomposites. It was found that while even small quantities of carbon nanotubes (~1 wt ...
متن کاملAn Experimental Study on the Thermal Conductivity of Carbon Nanotubes/Oil (TECHNICAL NOTE)
[if gte mso 9]> In the present work, the thermal conductivity coefficients of nanoparticle-oil suspensions for two types of carbon nanotubes, single-walled (SWNTs) and multi-walled (MWNTs) carbon nanotubes at 0.1, 0.2 and 0.3 wt.% were measured by a modified transient hot wire method (KD2-pro thermal property meter). Results showed that the thermal conductivity of suspension containing single-...
متن کاملDevelopment and Fabrication of Carbon Nanotube (CNT) based Morphological and Electrical Characterization
This paper presents the development and fabrication of carbon nanotube (CNT) based sensor devices through morphological and electrical characterization. The silicon oxide (SiO2) as insulator is formed by dry oxidation process and Aurum (Au) layer is deposited using thermal evaporator. Then, the electrodes pattern is transferred by photolithography process. The single-walled carbon nanotubes (SW...
متن کاملSurveying and Comparing Thermal Conductivity and Physical Properties of Oil Base NanoFluids Containing Carbon and Metal Oxide Nanotubes
In this research, nano materials with tubular structures are added to SAE 20W50 engine oil to study the rate of their effects on the properties of engine oil. Multi-walled carbon nanotubes (MWCNTs) and vanadium oxide nanotubes (VONTs) has been used as two different additive materials, one of them is carbonic and the other is metallic oxides and their effect on different parameters contain...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 47 13 شماره
صفحات -
تاریخ انتشار 2011