Soy protein–nanocellulose composite aerogels
نویسندگان
چکیده
Organic aerogels based on two important and widely abundant renewable resources, soy proteins (SP) and nanofibrillar cellulose (NFC) are developed from precursor aqueous dispersions and a facile method conducive of channeland defect-free systems after cooling and freeze-drying cycles that yielded apparent densities on the order of 0.1 g/cm. NFC loading drives the internal morphology of the composite aerogels to transition from networkto fibrillar-like, with high density of interconnected cells. Composite aerogels with SP loadings as high as ca. 70 % display a compression modulus of 4.4 MPa very close to that obtained from reference, pure NFC aerogels. Thus, the high compression modulus of the composite system is not compromised as long as a relatively low amount of reinforcing NFC is present. The composite materials gain moisture (up to 5 %) in equilibrium with 50 % RH air, independent of SP content. Furthermore, their physical integrity is unchanged upon immersion in polar and non-polar solvents. Fast liquid sorption rates are observed in the case of composite aerogels in contact with hexane. In contrast, water sorption is modulated by the chemical composition of the aerogel, with an important contribution from swelling. The potential functionalities of the newly developed SP– NFC composite green materials can benefit from the reduced material cost and the chemical features brought about the amino acids present in SPs.
منابع مشابه
Inorganic hollow nanotube aerogels by atomic layer deposition onto native nanocellulose templates.
Hollow nano-objects have raised interest in applications such as sensing, encapsulation, and drug-release. Here we report on a new class of porous materials, namely inorganic nanotube aerogels that, unlike other aerogels, have a framework consisting of inorganic hollow nanotubes. First we show a preparation method for titanium dioxide, zinc oxide, and aluminum oxide nanotube aerogels based on a...
متن کاملHydrophobic nanocellulose aerogels as floating, sustainable, reusable, and recyclable oil absorbents.
Highly porous nanocellulose aerogels can be prepared by vacuum freeze-drying from microfibrillated cellulose hydrogels. Here we show that by functionalizing the native cellulose nanofibrils of the aerogel with a hydrophobic but oleophilic coating, such as titanium dioxide, a selectively oil-absorbing material capable of floating on water is achieved. Because of the low density and the ability t...
متن کاملMechanosorptive creep in nanocellulose materials
The creep behavior of nanocellulose films and aerogels are studied in a dynamic moisture environment, which is crucial to their performance in packaging applications. For these materials, the creep rate under cyclic humidity conditions exceeds any constant humidity creep rate within the cycling range, a phenomenon known as mechanosorptive creep. By varying the sample thickness and relative humi...
متن کاملPartitioned airs at microscale and nanoscale: thermal diffusivity in ultrahigh porosity solids of nanocellulose
High porosity solids, such as plastic foams and aerogels, are thermally insulating. Their insulation performance strongly depends on their pore structure, which dictates the heat transfer process in the material. Understanding such a relationship is essential to realizing highly efficient thermal insulators. Herein, we compare the heat transfer properties of foams and aerogels that have very hi...
متن کامل