Systematic, Unintended Drifts in the Cyclic Force Produced with the Fingertips.
نویسندگان
چکیده
Cyclic isometric finger-force patterns established using visual feedback show systematic drifts when the feedback is removed. Force changes at multiple time scales and in opposite directions have been reported. For further characterization of these drifts, healthy subjects produced isometric, cyclic finger force with and without visual feedback at various initial amplitudes and frequencies. We hypothesized that on feedback removal, the amplitude will be attracted toward a preferred value that is frequency dependent. We found that the amplitude always increased after feedback removal. The magnitude of the amplitude increase changed with initial frequency, but it was invariant over the explored range of initial amplitudes. Thus, the existence of a preferred amplitude of force oscillations was not supported. We interpret these results within the referent configuration and the referent configuration back-coupling hypotheses. These data will inform a mathematical model of finger-force drifts. However, currently, they raise more questions than they answer, and a coherent account of finger-force drifts remains a challenge.
منابع مشابه
The Influence of Effective Factors on Mechanical Stress on Fingertips During Snap-fit Assembly
Objectives: Nowadays, Snap-fits are used in the automotive industry as a proper alternative for mechanical joints, cabling joints, and car interior lining joints. Due to the special form of these joints, which are assembled manually, the contact area between Snap-fits and the worker’s fingertips can be too small. This can cause skin pain on the worker’s fingertips. Therefore, ...
متن کاملNumerical and Experimental Study on Ratcheting Behavior of Plates with Circular Cutouts under Cyclic Axial Loading
In this paper, accumulation of plastic deformation of AISI 1045 steel plates with circular cutouts under cyclic axial loading is studied. Loading was applied under force-control conditions. Experimental tests were performed using a Zwick/Roell servo hydraulic machine. Under force-control loading with nonzero mean force, plastic strain was accumulated in continuous cycles called ratcheting. Nume...
متن کاملExperimental investigations on the softening and ratcheting behaviors of steel cylindrical shell under cyclic axial loading
In this research, softening and ratcheting behaviors of Ck20 alloy steel cylindrical shells were studied under displacement-control and force-control cyclic axial loading and the behavior of hysteresis curves of specimens was also investigated. Experimental tests were performed by a servo-hydraulic INSTRON 8802 machine. The mechanical properties of specimens were determined according to ASTM E8...
متن کاملNumerical and Experimental Study on Ratcheting Behavior of Steel Cylindrical Shells with/without Cutout Under Cyclic Combined and Axial Loading
Ratcheting behavior of steel 304L cylindrical shell under cyclic combined and axial loading are investigated in this paper, numerically. Cylindrical shells were fixed oblique at angle of 20° and normal with respect to the longitudinal direction of the shell and subjected to force-controlled cycling with non-zero mean force, which causes the accumulation of plastic deformation or ratcheting beha...
متن کاملSelective Binding of Cyclic Nanopeptide with Halides and Ion Pairs; a DFT-D3 Study
In this article, theoretical studies on the selective complexation of the halide ions (F¯, Cl¯ and Br¯) and ion pairs (Na+F¯, Na+Cl¯ and Na+Br¯) with the cyclic nano-hexapeptide (CP) composed of L-proline have been performed in the gas phase. In order to calculate the dispersion interaction energies of the CP and ions, DFT-D3 calculations at the M05-2X-D3/6-31G(d) level was employed. Based on t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Motor control
دوره 22 1 شماره
صفحات -
تاریخ انتشار 2018