A Sway Reduction Controller For Construction Crane
نویسندگان
چکیده
A tower crane can be reduced the sway oscillation easily by controlling the rotation acceleration. With the proposed open-loop fast control method which is operated by controlling acceleration, the sway angle of suspended load can be maintained during the movement as well as reduced oscillation during and at the end of movement. In this paper, we design and produce a scaled tower crane with a servo control mechanism which can be used to control crane rotation precisely. Also, we do experiments with our scaled tower crane to validate the proposed fast control method. Experiment results demonstrate the effectiveness of maintaining fixed angle during the movement and reducing oscillation.
منابع مشابه
Anti-swing Fuzzy Controller Design for a 3D Overhead Crane
This paper proposes a simple but efficient technique to control 3D overhead crane. Load must track a desired path and not sway more than a reasonable range.The proposed method uses PID control for trolley to track the desired path and fuzzy control compensation to eliminate the load swing. Only the projection of swing angle is applied to design the fuzzy controller. No plant information of cran...
متن کاملSway Reduction on Gantry Crane System using Delayed Feedback Signal and PD-type Fuzzy Logic Controller: A Comparative Assessment
This paper presents the use of anti-sway angle control approaches for a two-dimensional gantry crane with disturbances effect in the dynamic system. Delayed feedback signal (DFS) and proportional-derivative (PD)-type fuzzy logic controller are the techniques used in this investigation to actively control the sway angle of the rope of gantry crane system. A nonlinear overhead gantry crane system...
متن کاملAnti-swing Fuzzy Controller Design for a 3D Overhead Crane
This paper proposes a simple but efficient technique to control 3D overhead crane. Load must track a desired path and not sway more than a reasonable range.The proposed method uses PID control for trolley to track the desired path and fuzzy control compensation to eliminate the load swing. Only the projection of swing angle is applied to design the fuzzy controller. No plant information of cran...
متن کاملA Controller Enabling Precise Positioning and Sway Reduction in Cranes with On-off Actuation
Precise manipulation of payloads is difficult with large cranes. Oscillation can be induced into the lightly damped system by motion of the overhead support point, or from environmental disturbances. A combined feedback and input shaping controller is presented here. The controller uses feedback to detect and compensate for positioning error in the overhead support unit (e.g. the bridge or trol...
متن کاملExperimental Investigation on Active Sway Control of a Gantry Crane System using PID Controller
This project presents an experimental investigations into the development proportional integral derivative (PID) control schemes for active sway control of a gantry crane system. The main objective of controlling a gantry crane is to transport the load as fast as possible without causing any unnecessary swing at the final position. The proposed controller is used as a feedback control which is ...
متن کامل