Tooth Fracture Detection in Spiral Bevel Gears System by Harmonic Response Based on Finite Element Method

نویسندگان

  • Yuan Chen
  • Rupeng Zhu
  • Guanghu Jin
  • Yeping Xiong
چکیده

Spiral bevel gears occupy several advantages such as high contact ratio, strong carrying capacity, and smooth operation, which become one of the most widely used components in high-speed stage of the aeronautical transmission system. Its dynamic characteristics are addressed by many scholars. However, spiral bevel gears, especially tooth fracture occurrence and monitoring, are not to be investigated, according to the limited published issues. Therefore, this paper establishes a three-dimensional model and finite element model of the Gleason spiral bevel gear pair. The model considers the effect of tooth root fracture on the system due to fatigue. Finite element method is used to compute the mesh generation, set the boundary condition, and carry out the dynamic load.The harmonic response spectra of the base under tooth fracture are calculated and the influence of main parameters on monitoring failure is investigated as well. The results show that the change of torque affects insignificantly the determination of whether or not the system has tooth fracture. The intermediate frequency interval (200Hz–1000Hz) is the best interval to judge tooth fracture occurrence. The best fault test region is located in the working area where the system is going through meshing.The simulation calculation provides a theoretical reference for spiral bevel gear system test and fault diagnosis.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Numerical and Experimental Investigation of Cold orBital Forging of a 16MnCr5 Alloy Spur Bevel Gear

The purpose of this research is to analyze the forging of bevel gears based on conventional forging method with material number 1.7131 with finite element method by means of SUPER FORGE software and to compare it with experimental cold orbital forging results.After doing simulation of conventional forging and obtaining press tonnage due to orbital forging method with DEFORM software, orbital fo...

متن کامل

Design and Manufacture of Spiral Bevel Gears with Reduced Transmission Errors

A method for the determination of the optimal polynomial functions for the conduction of machine-tool setting variations in pinion teeth finishing in order to reduce the transmission errors in spiral bevel gears is presented. Polynomial functions of order up to five are applied to conduct the variation of the cradle radial setting and of the cutting ratio in the process for pinion teeth generat...

متن کامل

The Mathematical Model of Spiral Bevel Gears - A Review

The spiral bevel gear (SBG), with its high contact ratio, high strength and smooth driving, is widely used to transmit dynamic power in various mechanical products, including vehicles, mining machinery, aerospace engineering, and helicopters [1] to [4]. Typical SBGs are shown in Figs. 1a and b. The SBG has been a subject of research for almost a century, and there is a significant amount of lit...

متن کامل

Meshing Error of elliptic cylinder gear based on tooth contact analysis

In order to study the dynamic meshing characteristics of the elliptic cylinder gear and obtain the meshing error of the gear transmission system, the two-dimensional static contact analysis of the gear tooth surface is carried out by using ANSYS software, and the key parts of the contact area of the tooth surface are determined. Then, the dynamic meshing model of the elliptic cylinder gear is e...

متن کامل

Optimization of Face-Hobbed Spiral Bevel Gears to Improve EHD Lubrication

In this study, an optimization methodology is presented to systematically define optimal tooth modifications introduced by head-cutter geometry and machine tool settings to simultaneously maximize the EHD load carrying capacity of the oil film and to minimize power losses in the oil film of facehobbed spiral bevel gears. The presented optimization procedure relies heavily on the EHD lubrication...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017