Carbon coated hollow Na2FePO4F spheres for Na-ion battery cathodes
نویسندگان
چکیده
Carbon coated porous hollow Na2FePO4F (C/Na2FePO4F) spheres with 500 nm diameter and 80 nm wall thickness are synthesized by a one-step template-free ultrasonic spray pyrolysis process using sucrose as the carbon source. Nano-sized porous hollow C/Na2FePO4F spheres allow electrolyte to penetrate into the hollow structure, and thus the electrochemical reaction can take place on both the outside and inside surface and in the pores. Also, the carbon coating on Na2FePO4F hollow spheres enhances the electronic conductivity and charge transfer reaction kinetics. The unique carbon coated porous hollow C/Na2FePO4F cathodes deliver 89 mAh g 1 capacity at a low rate of 0.1C, and 75 mAh g 1 at 1C, and maintains 33% of capacity at 9C. After 750 cycles at 1C, C/Na2FePO4F cathodes can still provide 60 mAh g 1, which is 80% of initial capacity. The significant advance in electrochemical performance of hollow C/Na2FePO4F spheres combined with mature aerosol spray synthesis technology make these carbon coated porous hollow C/ Na2FePO4F spheres very promising as cathode materials for practical applications in Na-ion batteries. 2012 Elsevier B.V. All rights reserved.
منابع مشابه
Scalable synthesis of Na3V2(PO4)3/C porous hollow spheres as a cathode for Na-ion batteries
Na3V2(PO4)3 (NVP) has been considered as a very promising cathodematerial for sodium-ion batteries (SIBs) due to its typical NASICON structure, which provides an open and three dimensional (3D) framework for Na migration. However, the low electronic conductivity of NVP limits its rate capability and cycling ability. In this study, carbon coated hollow structured NVP/C composites are synthesized...
متن کاملPreparation of fluorine-doped, carbon-encapsulated hollow Fe3O4 spheres as an efficient anode material for Li-ion batteries.
Herein we report the design and synthesis of fluorine-doped, carbon-encapsulated hollow Fe3O4 spheres (h-Fe3O4@C/F) through mild heating of polyvinylidene fluoride (PVDF)-coated hollow Fe3O4 spheres. The spheres exhibit enhanced cyclic and rate performances. The as-prepared h-Fe3O4@C/F shows significantly improved electrochemical performance, with high reversible capacities of over 930 mA h g(-...
متن کاملComparison of electrochemical performances of olivine NaFePO4 in sodium-ion batteries and olivine LiFePO4 in lithium-ion batteries.
Carbon-coated olivine NaFePO(4) (C-NaFePO(4)) spherical particles with a uniform diameter of ∼80 nm are obtained by chemical delithiation and subsequent electrochemical sodiation of carbon-coated olivine LiFePO(4) (C-LiFePO(4)), which is synthesized by a solvothermal method. The C-NaFePO(4) electrodes are identical (particle size, particle size distribution, surface coating, and active material...
متن کاملTowards ultrathick battery electrodes: aligned carbon nanotube-enabled architecture.
Vapor deposition techniques were utilized to synthesize very thick (∼1 mm) Li-ion battery anodes consisting of vertically aligned carbon nanotubes coated with silicon and carbon. The produced anode demonstrated ultrahigh thermal (>400 W·m(-1) ·K(-1)) and high electrical (>20 S·m(-1)) conductivities, high cycle stability, and high average capacity (>3000 mAh·g(Si) (-1)). The processes utilized a...
متن کاملFacile Synthesis of V2O5 Hollow Spheres as Advanced Cathodes for High-Performance Lithium-Ion Batteries
Three-dimensional V2O5 hollow structures have been prepared through a simple synthesis strategy combining solvothermal treatment and a subsequent thermal annealing. The V2O5 materials are composed of microspheres 2–3 μm in diameter and with a distinct hollow interior. The as-synthesized V2O5 hollow microspheres, when evaluated as a cathode material for lithium-ion batteries, can deliver a speci...
متن کامل