Simulation of electron transport during electron-beam-induced deposition of nanostructures
نویسندگان
چکیده
We present a numerical investigation of energy and charge distributions during electron-beam-induced growth of tungsten nanostructures on SiO2 substrates by using a Monte Carlo simulation of the electron transport. This study gives a quantitative insight into the deposition of energy and charge in the substrate and in the already existing metallic nanostructures in the presence of the electron beam. We analyze electron trajectories, inelastic mean free paths, and the distribution of backscattered electrons in different compositions and at different depths of the deposit. We find that, while in the early stages of the nanostructure growth a significant fraction of electron trajectories still interacts with the substrate, when the nanostructure becomes thicker the transport takes place almost exclusively in the nanostructure. In particular, a larger deposit density leads to enhanced electron backscattering. This work shows how mesoscopic radiation-transport techniques can contribute to a model that addresses the multi-scale nature of the electron-beam-induced deposition (EBID) process. Furthermore, similar simulations can help to understand the role that is played by backscattered electrons and emitted secondary electrons in the change of structural properties of nanostructured materials during post-growth electron-beam treatments.
منابع مشابه
Highly conductive and pure gold nanostructures grown by electron beam induced deposition
This work introduces an additive direct-write nanofabrication technique for producing extremely conductive gold nanostructures from a commercial metalorganic precursor. Gold content of 91 atomic % (at. %) was achieved by using water as an oxidative enhancer during direct-write deposition. A model was developed based on the deposition rate and the chemical composition, and it explains the surfac...
متن کاملElectron flux controlled switching between electron beam induced etching and deposition
Electron beam induced deposition EBID and etching EBIE are promising methods for the fabrication of three-dimensional nanodevices, wiring of nanostructures, and repair of photolithographic masks. Here, we study simultaneous EBID and EBIE, and demonstrate an athermal electron flux controlled transition between material deposition and etching. The switching is observed when one of the processes h...
متن کاملElectron-stimulated purification of platinum nanostructures grown via focused electron beam induced deposition
Platinum-carbon nanostructures deposited via electron beam induced deposition from MeCpPt(IV)Me3 are purified during a post-deposition electron exposure treatment in a localized oxygen ambient at room temperature. Time-dependent studies demonstrate that the process occurs from the top-down. Electron beam energy and current studies demonstrate that the process is controlled by a confluence of th...
متن کاملElectron-driven and thermal chemistry during water-assisted purification of platinum nanomaterials generated by electron beam induced deposition
Focused electron beam induced deposition (FEBID) is a versatile tool for the direct-write fabrication of nanostructures on surfaces. However, FEBID nanostructures are usually highly contaminated by carbon originating from the precursor used in the process. Recently, it was shown that platinum nanostructures produced by FEBID can be efficiently purified by electron irradiation in the presence of...
متن کاملFabrication and characterization of nanostructures on insulator substrates by electron-beam-induced deposition.
The fabrication, characterization, and decoration with metallic nanoparticles of nanostructures such as nanowhiskers, nanodendrites, and fractal-like nanotrees on insulator substrates by electron-beam-induced deposition (EBID) are reviewed. Nanostructures with different morphologies of whiskers, dendrites, or trees are fabricated on insulator (Al2O3 or SiO2) substrates by EBID in transmission e...
متن کامل