Three Dimensional Simulations of Enhanced Heat Transfer in a Flat Passage Downstream From a Grooved Channel
نویسندگان
چکیده
Spectral element simulations of three-dimensional flow and augmented convection in a flat passage downstream from a fully developed channel with symmetric, transverse grooves on opposite walls were performed for 405<Re<764. Unsteady flow that develops in the grooved region persists several groove-lengths into the flat passage, increasing both local heat transfer and pressure gradient relative to that in a steady flat passage. Moreover, the heat transfer for a given pumping power in the first three groove-lengths of the flat passage was greater than the levels observed in a fully developed grooved passage. @DOI: 10.1115/1.1418371#
منابع مشابه
Two-Dimensional Simulations of Enhanced Heat Transfer in an Intermittently Grooved Channel
Two-dimensional Navier-Stokes simulations of heat and momentum transport in an intermittently grooved passage are performed using the spectral element technique for the Reynolds number range 600<Re<1800. The computational domain has seven contiguous transverse grooves cut symmetrically into opposite walls, followed by a flat section with the same length. Periodic inflow/outflow boundary conditi...
متن کاملNumerical Analysis of Fully Developed Flow and Heat Transfer in Channels with Periodically Grooved Parts (TECHNICAL NOTE)
To obtain a higher heat transfer in the low Reynolds number flows, wavy channels are often employed in myriad engineering applications. In this study, the geometry of grooves shapes is parameterized by means of four angles. By changing these parameters new geometries are generated and numerical simulations are carried out for internal fully developed flow and heat transfer. Results are compared...
متن کاملApplication of Single Objective Genetic Algorithm to Optimize Heat Transfer Enhancement from a Flat Plate
The optimal shape of a two dimensional turbulator above an isothermal flat plate is found by using numerical simulation. The turbulent boundary layer over the flat plate was disrupted at various situations by inserting a quadrilateral bar where the boundary layer thickness kept more than three times greater than the insert\'s height. As a result, the overall heat transfer coefficient of the wal...
متن کاملEffect of Square Rod Aspect Ratio on Vortex Shedding Downstream the Rod and Heat Transfer Enhancement from the Neighboring Flat Plate
A rectangular rod is placed in a flow field flowing parallel to a flat plate. Effect of chord-thickness ratio of rectangular rod on developing vortex shedding downstream to the rod is studied. Then, for each one of the aspect ratios, the distance of the rod from the neighboring flat plate is reduced until the rod sticks to the flat plate. In each case, the effect of the flat plate boundary laye...
متن کاملEffect of Square Rod Aspect Ratio on Vortex Shedding Downstream the Rod and Heat Transfer Enhancement from the Neighboring Flat Plate
A rectangular rod is placed in a flow field flowing parallel to a flat plate. Effect of chord-thickness ratio of rectangular rod on developing vortex shedding downstream to the rod is studied. Then, for each one of the aspect ratios, the distance of the rod from the neighboring flat plate is reduced until the rod sticks to the flat plate. In each case, the effect of the flat plate boundary laye...
متن کامل