An Active Resonant Conductance Method for Design of Large Traveling-Wave-Fed SIW Linear Slot Arrays

نویسندگان

  • Tongfei Yu
  • Zhengpeng Wang
  • Haibo Zhao
  • Jungang Miao
چکیده

This paper presents an active resonant conductance method (ARCM) for the design of large traveling-wave-fed SIW linear slot arrays. Two key slot parameters, slot offsets and lengths, are derived from excitation coefficients with intermediary active resonant conductance. In this method, both dominant mode mutual coupling which includes external & internal and higher order modes mutual coupling are considered. An efficient way to derive active resonant conductance of slots in large slot arrays is proposed, which makes ARCM feasible for the design of large traveling-wave-fed linear slot arrays with high performance, e.g., low sidelobe level (SLL). Finally, a 16-slot and a 32-slot travelingwave-fed SIW slot array antennas are designed. The processing of the 32-slot array design shows the efficiency of the proposed method for large arrays. The 16-slot array is fabricated and measured. Results from simulation and measurement verify the proposed method.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design of planar matching loads for traveling-wave-fed SIW slot arrays

This paper presents a novel planar matching load for travelingwave-fed substrate integrated waveguide (SIW) slot arrays. The load consists of a planar grounded coplanar waveguide (GCPW) matching load and a planar GCPW to SIW transition which makes the GCPW matching load compatible with the SIW. In the GCPW matching load a high frequency resistor is used to dissipate the remaining power. A trave...

متن کامل

Design Investigation of Microstrip Patch and Half-Mode Substrate Integrated Waveguide Cavity Hybrid Antenna Arrays

In this paper two linear arrays including a linear 1×4 and a planar 2×2 of microstrip patch and half-mode substrate integrated waveguide (SIW) cavity hybrid antenna are introduced and investigated. These are simply implemented using low cost single layer printed circuit board (PCB) process. The array element consists of a rectangular microstrip patch with appropriate dimensions in the vicinity ...

متن کامل

Design and Development of High Gain, Low Profile and Circularly Polarized Cavity-backed Slot Antennas Using High-order Modes of Square Shaped Substrtae Integrated Waveguide Resonator

In In this paper, two low profile, single fed cavity backed slot antennas providing a circularly polarized (CP) wave are introduced. One of the antennas presents a right-handed CP (RHCP) wave, while the other one offers a left handed CP (LHCP) wave. The proposed antennas consist of a square shaped Substrtae Integrated Waveguide (SIW) cavity incorporatng two couples of radiating slots to radiate...

متن کامل

Multiband Slot Loaded Uniplanar CPW-fed Monopole Antenna with Asymmetrical Arms

This paper presents a new approach for the design of a multiband uniplanar CPW-fed monopole antenna. The antenna consists of a fork like monopole strip to which is added an inverted U-shaped strip. The three branch fork like strip can create three resonant bands within the WLAN range while the placement of the inverted U-shaped strip provides a better impedance matching for the lowest resonant ...

متن کامل

An Ultralow Cross-Polarization Slot Array Antenna in Narrow Wall of Angled Ridge Waveguide

A low cross-polarization slot array antenna in the narrow wall of ridge waveguide is presented. A non-angled slot which is created in the narrow wall of the ridge waveguide is considered to be used as radiating resonant slot. The normalized resistance and normalized reactance curves are presented for design purposes. A six element slot array waveguide antenna with ridges on its narrow wall is t...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017