First-Order Glue

Presentation and Analysis of Methods for Increasing Glue Joint Strength in the Same Length Joint

Glue joints are more useful in Aerospace so in this article we presented new method for glue joint. In this method the maximum stresses that occurs at the edges of the bottom glue joint and cause ultimate failure in this type of connection is Decrease and increase the glue joint strength. In this method glue in the area overlapping the discrete and separate column considered Also, the connectio...

Why Glue a Donkey to an F-structure When You Can Constrain and Bind It Instead

The semantic treatment of anaphora using λ-DRT with Glue which I present combines the strengths of both by assigning to each the task where it arguably fares best: Glue composes meanings and DRT deals with anaphoric resolution. Key to this approach is a simple first-order system for λ-DRT that allows LFG syntactic constraints to be transferred into the dynamic representation language. This para...

A Scaling-up Synthesis from Laboratory Scale to Pilot Scale and to near Commercial Scale for Paste-Glue Production

This paper concerns on developing a synthesis method of paste-glue production for gummed tape using a corn-based starch as an alternative feedstock from laboratory-scale to pilot-scale and to near commercial scale. Basically, two methods of synthesis were developed to produce paste-glue in laboratory scale. Based on the two methods, we then scale-up the earlier laboratory scale data to pilot-sc...

Order Ethics and the Problem of Social Glue

Efficient Squares and Turing Universality at Temperature 1 with a Unique Negative Glue

Is Winfree’s abstract Tile Assembly Model (aTAM) “powerful?” Well, if certain tiles are required to “cooperate” in order to be able to bind to a growing tile assembly (a.k.a., temperature 2 self-assembly), then Turing universal computation and the efficient self-assembly of N ×N squares is achievable in the aTAM (Rotemund and Winfree, STOC 2000). So yes, in a computational sense, the aTAM is qu...