onversion of hazardous plastic wastes into useful chemical products ohammad Nahid
نویسنده
چکیده
Azoisobutylnitrile (AIBN) initiator was used in the treatment of most widely used domestic plastics in lieu of catalysts. The pyrolysis of low-density polyethylene (LDPE), high-density polyethylene (HDPE), polypropylene (PP), poly-ethylene terephthalate (PET) and polystyrene (PS) plastics with azoisobutylnitrile was carried out individually under nitrogen atmosphere. A series of single (plastic/AIBN) and binary (mixed plastics/AIBN) reactions were carried out in a 25-cm3 micro-autoclave reactor. The optimum conditions selected for this study were: 5% AIBN byweight of total plastics, 60min, 650psi and 420 ◦C. It was
منابع مشابه
Plasma pyrolysis and gasification of plastics waste – a review
Plasma pyrolysis integrates thermo-chemical properties of plasma using pyrolysis process for safe disposal of solid wastes. It is an environment friendly technology to generate valuable byproducts by converting municipal solid waste, biomedical waste and hazardous wastes at 800-1000°C. Plasma Pyrolysis of plastic wastes generates pyrolysis gas, which can be utilized for energy recovery via diff...
متن کاملCharacterization of Bitumen Mixed with Plastic Waste
Plastic (Polyethylene Terephthalate, PET) is now used as packaging material for a whole range of consumer products in addition to carbonated beverages. Although plastics are very useful product, but the disposal of these wastes has become a problem and is of great concern, particularly in our country. One of the solutions to the disposal of plastic wastes is recycling it...
متن کاملPreparation and Characterization of Diols and Polyols Based on Aminolysisof Poly (ethylene terephthalate) Wastes with Alkanolamines
The Plastic Waste phenomenon, which is the result of increasing poly (ethylene terephthalate) production and the wide range PET consumption in different industries, caused one of the major environmental concerns. Therefore,many different ways have been studied and applied for chemical recycling of PET. One of the most important ways to depolymerize poly (ethylene terephthalate) is the aminolysi...
متن کاملEvaluation of quality and quantity of solid wastes in Babol Dental Faculty–North of Iran
Introduction: Dental wastes are a main part of urban solid wastes in each society and have pathogenic agents and toxic chemicals, which put health of patients, personnel and other referees to dental clinics in danger. The present study was done to recognize the quality and quantity of the different generated wastes at various parts of the Faculty of Dentistry-Babol University of Medical S...
متن کاملPotential for energy recovery from municipal plastic wastes generated in Nigeria
Management of municipal solid wastes (MSW) in most developed societies now involves the use of thermo-chemical conversion methods. This leads to energy and material recovery while also protecting the environment. However, till date most of the wastes generated in Nigeria (including plastic wastes) are either land-filled or openly burnt. These methods are not sustainable and environmentally non-...
متن کامل