Adaptive Modeling of Reliability Properties for Control and Supervision Purposes
نویسندگان
چکیده
Modeling of reliability characteristics typically assumes that components and systems fail if a certain individual damage level is exceeded. Every (mechanical) system damage increases irreversibly due to employed loading and (mechanical) stress, respectively. The main issue of damage estimation is adequate determination of the actual state-of-damage. Several mathematical modeling approaches are known in the literature, focusing on the task of how loading effects damage progression (e.g., Wöhler, 1870) for wear processes. Those models are only valid for specific loading conditions, a priori assumptions, set points, etc. This contribution proposes a general model, covering adequately the deterioration of a set of comparable systems under comparable loading. The main goal of this contribution is to derive the loading–damage connection directly from observation without assuming any damage models at the outset. Moreover, the connection is not investigated in detail (e.g., to examine the changes in material, etc.) but only approximated with a probabilistic approach. The idea is subdivided into two phases: A problem-specific relation between loading applied (to a structure, which contributes to the stress) and failure is derived from simulation, where a probabilistic approach only assumes a distribution function. Subsequently, an adequate general model is set up to describe deterioration progression. The scheme will be shown through simulation-based results and can be used for estimation of the remaining useful life and predictive maintenance/control.
منابع مشابه
Modeling and Control of Gas Turbine Combustor with Dynamic and Adaptive Neural Networks (TECHNICAL NOTE)
متن کامل
Designing and Modeling a Control System for Aircraft in the Presence of Wind Disturbance (TECHNICAL NOTE)
This paper proposes a switching adaptive control for trajectory tracking of unmanned aircraft systems. The switching adaptive control method is designed to overcome the wind disturbance and achieve a proper tracking performance for control systems. In the suggested system, the wind disturbance is regarded as a finite set of uncertainties; a controller is designed for each uncertainty, and a per...
متن کاملModeling and assessment of student effective supervision drivers
Drivers are motivating and provocative factors of the supervision process in complex, uncertain and fluctuating conditions to achieve student’s empowerment. The first purpose of this study is to evaluate the fit of the model of effective driving instruction for graduate and doctoral students and the second one is the pathology of the guidance process of this model. The research is done in ways ...
متن کاملDynamic modeling and control of a 4 DOF robotic finger using adaptive-robust and adaptive-neural controllers
In this research, first, kinematic and dynamic equations of a 4-DOF 3-link robotic finger are derived using Denavit-Hartenberg convention and Lagrange’s formulation. To model the muscles, several springs and dampers are placed between the finger links. Then, two advanced controllers, namely adaptive-robust and adaptive-neural, which can control the robotic finger in presence of parametric uncer...
متن کاملبررسی ابعاد و اعتبارسنجی پرسشنامه عملکرد انطباقی کارکنان با روش تحلیل عاملی اکتشافی و تائیدی: مطالعه‌ای در بین پرستاران
Introduction: Adaptive performance is defined as an employee’s ability to deal with changes and new and unusual situations in the workplace. The present study mainly focused on factor analysis of the Adaptive Performance Scale (APS) and determining its validity and reliability. Adaptive performance is a multi-dimensional structure with five latent factors. Materials and Methods...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Applied Mathematics and Computer Science
دوره 21 شماره
صفحات -
تاریخ انتشار 2011