A Fault Area Location Method in Distribution Network with DG
نویسندگان
چکیده
To precisely locate the grounded fault area in distribution network with DG, a new grounded fault area location algorithm based on three-phase impedance model and fault features in distribution network with DG is proposed in this paper. This method establishes three-phase impedance model if the distribution network with DG, analyzes and extracts the fault characteristics on the basis of the three phase impedance model of distribution network with DG. According to the characteristic of the feature value in the fault point, this method traverses all the nodes and gets the fault associated nodes. The method proposed in this paper was tested in a sixty nodal distribution system with six DG’s, the result of the method verifies that the method can precisely locate the grounded fault area in distribution network with DG.
منابع مشابه
TC-FLSFCL Provision for Improvement of Distribution System Reliability by TOPSIS based NSGA-II Method
An approach for assignment of the optimal location and tap changer adjustment related to flux-lock type superconducting fault current limiters with tap changer (TC-FLSFCL) is used in this paper by debating the reduction of fault current flowing from each device and enhancement of reliability varying with customer type in a distribution network connected with distribution generation (DG). TC-FLS...
متن کاملFault Location in Active Distribution Networks Using Improved Whale Optimization Algorithm
To realize the self-healing concept of smart grids, an accurate and reliable fault locator is a prerequisite. This paper presents a new fault location method for active power distribution networks which is based on measured voltage sag and use of whale optimization algorithm (WOA). The fault induced voltage sag depends on the fault location and resistance. Therefore, the fault location can be f...
متن کاملResearch on Fault Location Method Based on Nonlinear Impedance Model
In modeling and location analysis, most traditional fault location methods do not consider about the existence of practical nonlinear model in distribution network, such as the nonlinearity of load and grounding resistor. Hence, the adopted model can’t express the practical network, and the location results will lose practical meaning. Aiming at solving the question above, this paper proposes a...
متن کاملA New Fast and Accurate Fault Location and Classification Method on MTDC Microgrids Using Current Injection Technique, Traveling-Waves, Online Wavelet, and Mathematical Morphology
In this paper, a new fast and accurate method for fault detection, location, and classification on multi-terminal DC (MTDC) distribution networks connected to renewable energy and energy storages presented. MTDC networks develop due to some issues such as DC resources and loads expanding, and try to the power quality increasing. It is important to recognize the fault type and location in order ...
متن کاملResearch on Fault Location in Distributed Network with DG Based on Complex Correlation Thevenin Equivalent and Strong Tracking Filter
With the introduction of distributed generators (DG), the traditional distribution system characterized by radical network becomes a multi-source one. Therefore the accuracy of the equivalent model of distributed generators directly affects the precision of fault location. To solve this problem, this paper proposed a fault location method based on complex correlation Thevenin equivalent and str...
متن کامل