Characterization of Titania Nanoparticles Synthesized by the Hydrothermal Method with Low Grade Mineral Precursors

نویسندگان

  • E. M. Mahdi
  • M. Hamdi
  • M. S. Meor Yusoff
  • P. Wilfred
چکیده

The objective of this work is to utilize a low-grade synthetic rutile to produce high-grade titania nanoparticles. Due to the nature of the precursor, the hydrothermal method needs modification in order to accommodate the precursors and chemical reagents. The product will be characterized with the XRD (crystallite size and crystallinity), EDXRF (chemical composition), SEM (Morphology), N2 adsorption-desorption (Surface Area) and UV-Vis-NIR. Results revealed a crystallite size of less than 20 nm, a surface area of 186.8 m/g, a morphology that is a combination of agglomeration and particles, and an optical band gap of 3.23 eV. It is concluded that synthetic rutile is a viable precursor to produce high quality titania nanoparticles.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Photo-degradation of Methylene Orange by zinc-sulfide nanoparticles synthesized via hydrothermal method

Background and Objective: In the present research, the synthesis and characterization of ZnS nanoparticles in zinc blend crystallite phase via hydrothermal method were reported. Advanced oxidation processes using nanophotocatalysts are one of the most efficient methods for removing the dyes with complex organic compounds from textile and industrial wastewaters. The photocatalytic performance of...

متن کامل

Synthesis and characterization of CdS nanoparticle anchored Silica-Titania mixed Oxide mesoporous particles: Efficient photocatalyst for discoloration of textile effluent

An efficient photocatalyst consisting of CdS nanoparticle dispersed mesoporous silica-titania was prepared using amphiphilic triblock copolymer P123 as template and silica-titania sol–gel precursors. The CdS nanoparticle was incorporated into silica-titania mesoporous nanosturctures by post impregnation method. The synthesized catalyst has been characterized by FTIR, TEM, SEM, and EDAX analysis...

متن کامل

Hydrothermal Synthesis of Er-Doped Luminescent TiO2 Nanoparticles

Here we report the synthesis and characterization of a stable suspension of fluorescent erbium-doped titania nanoparticles and their assembly into thin films and photonic crystals. The nanoparticles were synthesized through a sol-gel process followed by peptization with tetramethylammonium hydroxide and hydrothermal treatment. As expected, following the hydrothermal treatment, X-ray diffraction...

متن کامل

Synthesis and morphology characterization of SnO2 nanoparticles by hydrothermal method

Nanoparticles are widely used in different applications such as cancer cell treatment and antibacterial agents. SnO2 nanoparticles were synthesized successfully by hydrothermal method and subsequent calcination using Tin (II) chloride- dihydrate, Sodium hydroxide, in presence of Hexadecyltrimethylammoniumn bromide (CTAB) as Surfactant. These nanoparticles were characterized by using Fourier tra...

متن کامل

Synthesis and morphology characterization of SnO2 nanoparticles by hydrothermal method

Nanoparticles are widely used in different applications such as cancer cell treatment and antibacterial agents. SnO2 nanoparticles were synthesized successfully by hydrothermal method and subsequent calcination using Tin (II) chloride- dihydrate, Sodium hydroxide, in presence of Hexadecyltrimethylammoniumn bromide (CTAB) as Surfactant. These nanoparticles were characterized by using Fourier tra...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012