AVI of Surface Flaws on Manufactures I

INTRODUCTION The defect detection on manufactures is of utmost importance in the optimization of industrial processes (Garcia 2005). In fact, the industrial inspection of engineering materials and products tends to the detection , localization and classification of flaws as quickly and as accurately as possible in order to improve the production quality. In this field a relevant area is constituted by visual inspection. Nowadays, this task is often carried out by a human expert. Nevertheless, such kind of inspection could reveal time-consuming and suffer of low repeatability because the judgment criteria can differ from operator to operator. Furthermore , visual fatigue or loss of concentration inevitably In order to reduce the burden of human testers and improve the detection of faulty products, recently many researchers have been engaged in developing systems in Automated Visual Inspection (AVI) of manufactures These systems reveal easily reliable from technical point of view and mimic the experts in the evaluation process of defects appropriately (Bahlmann, Heidemann & Ritter 1999), even if defect detection in visual inspection can become a hard task. In fact, in industrial processes a large amount of data has to be handled and flaws belong to a great number of classes with dynamic defect populations, because defects could present similar characteristics among different classes and different interclass features (R. visual inspection systems are able to adapt to dynamic operating conditions. To this purpose soft computing techniques based on the use of Artificial Neural Networks (ANNs) have already been proposed in several different areas of industrial production. In fact, neural networks are often exploited for their ability to recognize a wide spread of different defects 2006). Although adequate in many instances, in other cases Neural Networks cannot represent the most suitable solution. In fact, the design of ANNs often requires the extraction of parameters and features, during a preprocessing stage, from a suitable data set, in which the most possible defects are recognized (Bahlmann, Heidemann & Ritter 1999, Karras 2003, Rimac-Drlje, Keller & Hocenski 2005). Therefore, methods based on neural networks could be time expensive for in-line applications because such preliminary steps and reason, when in an industrial process time constraints play an important role, a hardware solution of the abovementioned methods can be proposed (R. of solution implies a further design effort which can be avoided by considering Cellular Neural Networks (CNNs) (Chua & Roska 2002). Cellular Neural Networks have good potentiality …