Predictive Function Control for Milling Process

نویسندگان

  • Zhihuan Zhang
  • Chao Hu
چکیده

The adaptive constant control for the cutting process is an effective way to improve the productivity of the Computer Numerical Control (CNC) milling machine. This control is achieved through adjusting the feed rate online, and many scholars has been concentrated in the field. However, in of the existing adaptive constant control algorithms, the controller parameters are tuned only depends on the dynamic behavior of the controlled system, without giving effect to control the input and system output prospects. Therefore, milling force mutated because of the mutation of the depth or width of cut usually resulting in the overshooting of control system or overflow of control input. In this paper, we present a new solution to the problem, in which a mathematical model of milling process is established based on the characteristics of the CNC milling process. Then the predictive functional control law is introduced on the milling process and the controller parameters can be tuned online. The Simulation results show that the proposed method has the advantages of strong robustness to different interferences, good practicability for the milling process, and good real-time control responsibility.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Controlling Nonlinear Processes, using Laguerre Functions Based Adaptive Model Predictive Control (AMPC) Algorithm

Laguerre function has many advantages such as good approximation capability for different systems, low computational complexity and the facility of on-line parameter identification. Therefore, it is widely adopted for complex industrial process control. In this work, Laguerre function based adaptive model predictive control algorithm (AMPC) was implemented to control continuous stirred tank rea...

متن کامل

Emotional Learning Based Intelligent Controller for MIMO Peripheral Milling Process

During the milling process, one of the most important factors in reducing tool life expectancy and quality of workpiece is the chattering phenomenon due to self-excitation. The milling process is considered as a MIMO strongly coupled nonlinear plant with time delay terms in cutting forces. We stabilize the plant using two independent Emotional Learning-based Intelligent Controller (ELIC) in par...

متن کامل

Improved Optimization Process for Nonlinear Model Predictive Control of PMSM

Model-based predictive control (MPC) is one of the most efficient techniques that is widely used in industrial applications. In such controllers, increasing the prediction horizon results in better selection of the optimal control signal sequence. On the other hand, increasing the prediction horizon increase the computational time of the optimization process which make it impossible to be imple...

متن کامل

Robust Model Predictive Control for a Class of Discrete Nonlinear systems

This paper presents a robust model predictive control scheme for a class of discrete-time nonlinear systems subject to state and input constraints. Each subsystem is composed of a nominal LTI part and an additive uncertain non-linear time-varying function which satisfies a quadratic constraint. Using the dual-mode MPC stability theory, a sufficient condition is constructed for synthesizing the ...

متن کامل

Investigations on Mechanics-Based Process Planning of Micro-End Milling in Machining Mold Cavities

This article may be used for research, teaching and private study purposes. Any substantial or systematic reproduction, redistribution , reselling , loan or sub-licensing, systematic supply or distribution in any form to anyone is expressly forbidden. The publisher does not give any warranty express or implied or make any representation that the contents will be complete or accurate or up to da...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013