A Two-Step, Temperature-Staged Direct Coal Liquefaction Process
نویسندگان
چکیده
Abstract—The world crude oil demand is projected to rise to 108.5 million bbl/d by the year 2035. With reserves estimated at 869 billion tonnes worldwide, coal remains an abundant resource. The aim of this work was to produce a high value hydrocarbon liquid product using a Direct Coal Liquefaction (DCL) process at, relatively mild operating conditions. Via hydrogenation, the temperature-staged approach was investigated in a dual reactor lab-scale pilot plant facility. The objectives included maximising thermal dissolution of the coal in the presence of tetralin as the hydrogen donor solvent in the first stage with 2:1 and 3:1 solvent: coal ratios. Subsequently, in the second stage, hydrogen saturation, in particular, hydrodesulphurization (HDS) performance was assessed. Two commercial hydrotreating catalysts were investigated viz. NickelMolybdenum (Ni-Mo) and Cobalt-Molybdenum (Co-Mo). GC-MS results identified 77 compounds and various functional groups present in the first and second stage liquid product. In the first stage 3:1 ratios and liquid product yields catalysed by magnetite were favoured. The second stage product distribution showed an increase in the BTX (Benzene, Toluene, Xylene) quality of the liquid product, branched chain alkanes and a reduction in the sulphur concentration. As an HDS performer and selectivity to the production of long and branched chain alkanes, Ni-Mo had an improved performance over Co-Mo. Co-Mo is selective to a higher concentration of cyclohexane. For 16 days on stream each, Ni-Mo had a higher activity than Co-Mo. The potential to cover the demand for low–sulphur, crude diesel and solvents from the production of high value hydrocarbon liquid in the said process, is thus demonstrated.
منابع مشابه
Direct Coal Liquefaction with Fe3O4 Nanocatalysts Prepared by a Simple Solid-State Method
Fe3O4 nanoparticles were prepared by a simple solid-state method under ambient conditions. The obtained nanoparticles, with small size and large surface area, were used as a catalyst for direct coal liquefaction (DCL). The results display that high conversion and oil yield were achieved with the nanocatalysts in direct liquefaction of two kinds of coals, i.e., Heishan coal and Dahuangshan coal....
متن کاملEffect of Recycle Solvent Hydrotreatment on Oil Yield of Direct Coal Liquefaction
Effects of the recycle solvent hydrotreatment on oil yield of direct coal liquefaction were carried out in the 0.18 t/day direct coal liquefaction bench support unit of National Engineering Laboratory for Direct Coal Liquefaction (China). Results showed that the hydrogen-donating ability of the hydrogenated recycle solvent improved and the hydrogen consumption of solvent hydrotreatment was incr...
متن کاملHydrothermal Liquefaction to Convert Biomass into Crude Oil
All fossil fuels found in nature — petroleum, natural gas, and coal, based on biogenic hypothesis — are formed through processes of thermochemical conversion (TCC) from biomass buried beneath the ground and subjected to millions of years of high temperature and pressure. In particular, existing theories attribute that petroleum is from diatoms (algae) and deceased creatures and coal is from dep...
متن کاملReaction Engineering of Direct Coal Liquefaction
Direct coal liquefaction has been studied and practiced since the 1930s. It was used in Germany during World War II to produce synthetic fuels when there was no oil allowed into the country. Since then, it has been studied in the United States and many different technologies have been investigated. Since the US is rich in coal resources, this is one way to be energy independent. Most of the dev...
متن کاملCatalysis in Direct Coal Liquefaction : Status and Directions for Research
The production of distillate fuels and chemicals from coal has never been economical in a free market economy. The principal factors which contribute to the high cost of coal-derived liquids are the large amounts of hydrogen which must be added to remove heteroatoms and to convert material containing about 5 wt% hydrogen to products with between 12 to 14 wt% hydrogen, the severe reaction condit...
متن کامل