Vibration Analysis of Composite Laminate Plate Excited by Piezoelectric Actuators
نویسندگان
چکیده
Piezoelectric materials can be used as actuators for the active vibration control of smart structural systems. In this work, piezoelectric patches are surface bonded to a composite laminate plate and used as vibration actuators. A static analysis based on the piezoelectricity and elasticity is conducted to evaluate the loads induced by the piezoelectric actuators to the host structure. The loads are then employed to develop the vibration response of a simply supported laminate rectangular plate excited by piezoelectric patches subjected to time harmonic voltages. An analytical solution of the vibration response of a simply supported laminate rectangular plate under time harmonic electrical loading is obtained and compared with finite element results to validate the present approach. The effects of location and exciting frequency of piezoelectric actuators on the vibration response of the laminate plate are investigated through a parametric study. Numerical results show that modes can be selectively excited, leading to structural vibration control.
منابع مشابه
Deflection of Cross-Ply Composite Laminates Induced by Piezoelectric Actuators
The coupling effects between the mechanical and electric properties of piezoelectric materials have drawn significant attention for their potential applications as sensors and actuators. In this investigation, two piezoelectric actuators are symmetrically surface bonded on a cross-ply composite laminate. Electric voltages with the same amplitude and opposite sign are applied to the two symmetri...
متن کاملTemperature Effects on Nonlinear Vibration of FGM Plates Coupled with Piezoelectric Actuators
An analytical solution for a sandwich circular FGM plate coupled with piezoelectric layers under one-dimension heat conduction is presented in this paper. A nonlinear static problem is solved first to determine the initial stress state and pre-vibration deformations. By adding an incremental dynamic state to the pre-vibration state, the differential equations are derived. The role of thermal en...
متن کاملA Higher-Order FEM for Vibration Control of Composite Plates with Distributed Piezoelectric Sensors and Actuators
The active vibration control of laminated composite plates using distributed piezoelectric sensors and actuators (Fig. 1) is studied numerically with a higher-order finite element method (FEM). Reddy’s simplified higher-order theory for transverse shear deformation, which is found to be much more accurate for both thin and thick composite plates as compared with other theories, is employed for ...
متن کاملOptimal energy density piezoelectric bending actuators
The design and analysis of piezoelectric actuators is rarely optimized for low mass applications. However, emerging technologies such as micro air vehicles, and microrobotics in general, demand high force, high displacement, low mass actuators. Utilization of generic piezoceramics and high performance composite materials coupled with intelligent use of geometry and novel driving techniques yiel...
متن کاملFree vibration Study of simply supported cylindrical laminateds panels with piezoelectric layer
In the present study, vibration of cylindrical laminates with different layers and angles were studied. In order to actuate and polarize in radial direction, a piezoelectric layer was located at outer surface of composite shell. Laminates were assumed long enough so that plane strain state analysis in 2D can be used properly. In order to satisfy the boundary conditions, variables in terms of Fo...
متن کامل